Bedienungsanleitung Mitsubishi WL7200U (Seite 5 von 68) (Englisch)

493650

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN-5

Important safeguards (continued)

WARNING:

Unplug immediately if there is something

wrong with your projector.

Do not operate if smoke, strange noise or odor comes out

of your projector. It might cause ﬁre or electric shock. In this

case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent

contact may result in an electric shock. Except as

speciﬁcally explained in the User Manual do not attempt to

service this product by yourself. Please contact your dealer

when you want to ﬁx, adjust or inspect the projector.

Do not modify this equipment.

It can lead to ﬁre or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged,

unplug the projector and contact your dealer for inspection.

It may lead to ﬁre if you keep using the damaged projector.

Be sure to unplug the power cord from the wall

outlet if the projector is fractured or deformed.

Otherwise, it may result in ﬁre or electric shock. Ask your

dealer for repair.

Do not face the projector lens to the sun.

It can lead to ﬁre.

Use correct voltage.

If you use incorrect voltage, it can lead to ﬁre.

Do not connect multiple electrical appliances

to a single wall outlet.

It can lead to ﬁre.

Do not extend the power cord.

It can lead to ﬁre.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface only.

Please do not place equipment on unstable surfaces.

Do not look into the lens when it is operating.

It may hurt your eyes. Never let children look into the lens

when it is on.

Do not touch the air outlet grille and bottom

plate, which become hot.

Do not touch them or put other equipment in front of the

air outlet grille. The air outlet grille and bottom plate, when

heated, may cause injury or damage to other equipment.

Also, do not set the projector on the desk which is easily

affected by heat.

Do not look into the air outlet grille when

projector is operating.

Heat, dust, etc. may blow out of it and hurt your eyes.

Do not insert your ﬁngers in the space

between the lens and the cabinet.

The lens may shift causing injury or damage to the projector.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the

projector, causing deterioration in the projector quality and ﬁre.

Do not use ﬂammable solvents (benzene, thinner,

etc.) and ﬂammable aerosols near the projector.

Flammable substances may ignite causing ﬁre or breakdown

because the temperature inside the projector rises very high

while the lamp is illuminating.

Do not use the projector with condensation on it.

It can lead to breakdown or other failure.

Place of installation

For safety’s sake, refrain from setting the projector at any

place subjected to high temperature and high humidity.

Please maintain an operating temperature, humidity, and

altitude as speciﬁed below.

• Operatingtemperature:

For use in the STANDARD mode, the allowable operating

temperature is +41°F (+5°C) to +104°F (+40°C).

For use in the HIGH ALTITUDE mode (see page 13),

the allowable operating temperature is +41°F (+5°C) to

+86°F (+30°C), which allows ﬂoor installation or ceiling

installation only.

• Operatinghumidity:between30%and90%

• Neverputanyheat-producingdeviceundertheprojector

so that the projector does not overheat.

• Donotattachtheprojectortoaplacethatisunstableor

subjected to vibration.

• Donotinstalltheprojectornearanyequipmentthat

produces a strong magnetic ﬁeld. Also refrain from

installing near the projector any cable carrying a large

current.

• Placetheprojectoronasolid,vibrationfreesurface;

otherwise it may fall, causing serious injury to a child or

adult, and serious damage to the product.

• Donotstandtheprojector;itmayfall,causingserious

injury and damage to the projector.

• Slantingtheprojectormorethan±10°(rightandleft)may

cause trouble or explosion of the lamp.

• Donotplacetheprojectornearair-conditioningunit,

heater, or humidiﬁer to avoid hot or moist air to the

exhaust and ventilation hole of the projector.

•

Do not place the projector in the following places.

Otherwise, a short circuit, heat generation, or melting of

the power cord coating may occur, causing ﬁre, electric

shock, product failure, or deformation.

• Outdoorsornonair-conditionedplace

• Placewhereagassuchasahydrogensuldeis

generated (i.e. hot spring)

• Placewherethereistoomuchsaltsuchasnearthe

coast

• Wedon’trecommendusingtheprojectoratanaltitude

of 2700 meters or higher (When using the product at an

altitude of 1500 to 2700 meters above the sea level, set

the HIGH ALTITUDE MODE to HIGH ALTITUDE.). Use

at an altitude of 2700 meters or higher may affect the

projector’s life.

Do not place a container containing water or

other liquid on the projector.

If water spills on or enters the projector, it may result in ﬁre or

electric shock.

Do not put any object that is heavy or larger

than the outer frame on the projector.

Otherwise, the object may fall losing its balance and cause

injury.

Do not subject the projector to strong shocks or

vibrations. Do not handle the projector roughly.

The projector may be damaged, resulting in ﬁre or electric

shock.

Mitsubishi WL7200U Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WL7200U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info