Bedienungsanleitung Mitsubishi WL7200U (Seite 65 von 68) (Englisch)

493650

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN-65

481

179

101*

418

Dimension drawings (unit: mm)

Speciﬁcations (continued)

Speciﬁcation of RGB signals in each computer

mode of the projector (continued)

Important:

• Some computers aren’t compatible with the

projector.

• The projector’s maximum resolution is 1280 x

800 pixels. It may not display images of higher

resolutions than 1280 x 800 correctly.

• Images with SYNC on G (Green) signal may jitter.

• Images with SYNC on G (Green) signal may be

tinged with green.

• If the resolution and frequency of your computer

aren’t shown on the table, ﬁnd the compatible

resolution and frequency by changing the resolution

of your computer.

•

TV60 and TV50 are equivalent to 480i and 576i

respectively. When these signals are supplied to the

VIDEO IN or S-VIDEO IN terminal, the signal mode is

indicated as TV60 or TV50. When they are supplied to

the COMPUTER/COMPONENT/VIDEO IN terminals,

the signal mode is indicated as 480i or 576i.

• Thisprojectordoesn’tsupport480psignalsfrom

video devices having 4 lines (R, G, B, CS*) or having 5

lines (R, G, B, H, V).

* : Composite Sync

REAL mode

When moire patterns or lines of uneven thickness

appear on the projected image, these symptoms may

be improved by displaying it in its original image size

(REAL mode). To display the image in the REAL mode,

set ASPECT of the FEATURE menu to REAL. (See

page 31 for menu setting.)

• Forsignalsthatarelargerthanthepanelresolution,

only their center part is displayed in the REAL

mode. The area exceeding the panel resolution isn’t

displayed.

• IntheREALmode,imagesareblack-framed

when the image resolution is lower than the panel

resolution.

• IntheREALmode,somesignalsmaybedisplayed

with a black frame even when they have a higher

resolution than the panel resolution.

481

179

101*

502

Without terminal cover

With terminal cover

Connectors

SERIAL

(D-SUB 9-pin)

Pin No.

Name I/O

1 – –

2 TXD IN

3 RXD OUT

4 – –

5 GND –

6 – –

7 – –

8 – –

9 – –

COMPUTER/COMPONENT/VIDEO

IN 1 (Mini D-SUB 15-pin)

Pin No.

Spec.

Pin No.

Spec.

1 R(RED)/P

9 DDC 5V

2 G(GREEN)/Y 10 GND

3 B(BLUE)/P

11 GND

4 GND 12 DDC Data

5 GND 13 HD/CS

6 GND 14 VD

7 GND 15 DDC Clock

8 GND

COMPUTER/COMPONENT/VIDEO

DVI-D IN (HDCP)

(DVI-D 24-pin

)

1724

Pin No.

Spec.

Pin No.

Spec.

1 TMDS DATA 2- 13

2 TMDS DATA 2+ 14

+5V Power

TMDS DATA 2 Shield

Ground (for +5V)

16 Hot Plug Detect

17 TMDS DATA 0-

6 DDC Clock 18 TMDS DATA 0+

7 DDC Data 19

TMDS DATA 0 Shield

9 TMDS DATA 1- 21

10 TMDS DATA 1+ 22

TMDS Clock Shield

TMDS DATA 1 Shield

23 TMDS Clock+

24 TMDS Clock-

HDMI IN

(HDMI 19-pin)

Pin No.

Spec.

Pin No.

Spec.

TMDS Data2+

TMDS Clock Shield

TMDS Data2 Shield

TMDS Clock-

TMDS Data2-

CEC

TMDS Data1+

–

TMDS Data1 Shield

SCL

TMDS Data1-

SDA

TMDS Data0+

DDC Ground

TMDS Data0 Shield

+5 V Power

TMDS Data0-

Hot Plug Detect

TMDS Clock+

*: Factory-defaults

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WL7200U Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi WL7200U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info