Bedienungsanleitung Mitsubishi WS48515 (Seite 39 von 100) (Englisch)

32985

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Add Screen

Figure 14

Select “Add” from the Edit NetCommand screen, and

the New Device screen will display. Select the device

type that you would like to add. You may add your

A/V Receiver (if not added in Initial setup) Cable Box,

Camcorder, DBS, DVD, Laser Disc and VCR.

At the next screen, choose the manufacturer. If you

choose “Other” for the manufacturer, the device (A/V

Receiver, Cable, DBS, DVD or VCR) can be learned

(see the following pages for details on learning). For

device types Laser Disc and Camcorder, the “Learn”

screen is skipped. There is no NetCommand support

or learning.

At the next screen, you can keep the default Name or

select a custom Name for the device, using ADJUST

or to select letters A-Z, numbers 0-9, and/or

symbols (!.&’/:*- and blank) for each character of the

name.

The next screen displays the Connection screen (RF

Connection for Cable Box, Figure 21). Select the TV

and A/V Receiver inputs that the device is connected

to. Connecting only audio to the A/V Receiver

is recommended. The A/V Receiver may need

configuring for digital audio.

Figure 14. Add screen

[Device] Screen

Figure 15

If you have added a new device in your home theater

system, use this screen to start learning. Our examples

show the choices for adding a VCR, however, the same

type of screens will appear for a Direct Broadcast

Satellite (DBS), DVD player or Cable Box.

Choose ONE of these options:

1. Select a recognized manufacturer. The model

number optimized for NetCommand will display at

the bottom of the screen. If a number follows the

manufacturer’s name, (example: Mitsubishi 1), this

indicates additional models are optimized for that

manufacturer. For many device types, non-listed

models may operate the same way as the listed

models do and will use the pre-loaded setting.

After selecting Next>, the screens that follow are:

the Name Screen (Figure 18), Connection screen

(Figure 19) and specialized device screens (Figures

20-22), ending with the Finish screen (Figure 25).

2. Select “Other”, then highlight “Learn” and press

ENTER. This will allow you to have NetCommand

learn the remote control signals of this new device.

After selecting “Learn” and pressing ENTER, the

screens that follow are: [Device] Learn screen

(Figure 16), [Device] Advanced Learn screen (Figure

17), Name screen (Figure 18), Connection screen,

(Figure 19) and specialized device screens (Figures

20-22), ending with the Finish screen (Figure 25).

3. Select “Other”, skip Learn and select Next>. This

will allow the device to appear and will allow

NetCommand to switch inputs to use this device.

However, NetCommand will not be able to control

this device. Later you may use the “Change” option

in the Setup menu to learn the remote control

signals.

After selecting Next>, the screens that follow are:

the Name Screen (Figure 18), Connection screen

(Figure 19) and specialized device screens (Figures

20-22), ending with the Finish screen (Figure 25).

Figure 15. [Device] screen

Edit NetCommand

, Adding Devices, continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WS48515 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info