Bedienungsanleitung Mitsubishi WS65517 (Seite 23 von 100) (Englisch)

33039

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Connecting IEEE 1394 Devices

4-Pin Style vs. 6-Pin Style

There are two different types of connectors used for

IEEE 1394 terminals and cables, a 4-pin and a 6-pin

style.

The 4-pin connector sends

digital audio signals, digital video

signals and digital control signals

back and forth between devices.

Your TV has three 4-pin type

connection jacks available. There

are two inputs on the back panel.

and an additional input on the

front panel.

The 6-pin connector is capable

of sending the same digital audio,

video and control signals as the

4-pin connector, but the 6-pin

connector is also able to send low

voltage electrical power. This TV

does not have 6 pin connectors.

The purpose of this low voltage electrical power is

to provide operating power to a device that is not

connected directly to the household AC power such

as a camcorder. A device with a 6-pin connector can

send this electrical power to another device, or receive

electrical power from another device, or simply use a

6-pin connector without using the two additional pins.

A 6-pin connector cannot be

connected directly to a 4-pin

jack, and vice versa. Instead,

you will need to obtain a 6-pin

to 4-pin adaptor or adaptor

cable. These cables are

available from electronic and

computer stores.

If you connect a 6-pin device to the TV (such as a

camcorder) that is designed to receive electrical power

from another 6-pin device, you will need to connect

the camcorder directly to the household AC, or use the

camcorder’s battery for power. If this is not possible,

then the camcorder will need to be connected directly

to another 6-pin device in the network that can provide

the electrical power.

6 pin to 4 pin adaptor

4 pin connector

6 pin connector

When Connecting IEEE 1394 Devices

• Do not loop the last device in the chain back to

the TV. When the device chain is looped, the TV

may not be able to work with the other devices.

• Place devices that have only a mechanical (two-

position) power switch at the end of the chain or

leave the power switch in the On position. When

turned Off, IEEE 1394 signals may not be able to

pass through the device to other devices.

• Place devices with the slowest communication

speed at the end of the chain. Sometimes the

communication speed will be marked near the

IEEE 1394 connector with an “S” number. The

higher the number, the faster the communication

speed. This TV has a communication speed of

S400. Devices with slow communication speed

can interfere with IEEE 1394 signals from faster

devices. When using NetCommand to set up

a digital recording between a faster and slower

device, the slower device should be the source.

• Do not use an IEEE 1394 cable longer than 15

feet between each device.

• This TV is an IEEE 1394a device. It can be used

with a 1394b system when an IEEE 1394a to

1394b convertor is used. 1394b systems enable

longer distance and multi-room applications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WS65517 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info