Bedienungsanleitung Mitsubishi WS65615 (Seite 23 von 100) (Englisch)

33003

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Connecting IEEE 1394 Devices

4-Pin Style vs. 6-Pin Style

There are two different types of connectors used for

IEEE 1394 terminals and cables, a 4-pin and a 6-pin

style.

The 4-pin connector sends

digital audio signals, digital video

signals and digital control signals

back and forth between devices.

Your TV has two or three 4-pin

type connection jacks available.

All models have two inputs

on the back panel. WS-55615,

WS-55615A. WS-65615.

WS-65615A and WS-73615 have

an additional input on the front

panel.

The 6-pin connector is capable

of sending the same digital audio,

video and control signals as the

4-pin connector, but the 6-pin

connector is also able to send low

voltage electrical power. This TV

does not have 6 pin connectors.

The purpose of this low voltage electrical power is

to provide operating power to a device that is not

connected directly to the household AC power such

as a camcorder. A device with a 6-pin connector can

send this electrical power to another device, or receive

electrical power from another device, or simply use a

6-pin connector without using the two additional pins.

A 6-pin connector cannot be

connected directly to a 4-pin

jack, and vice versa. Instead,

you will need to obtain a 6-pin to

4-pin adaptor or adaptor cable.

These cables are available from

electronic and computer stores.

If you connect a 6-pin device to the TV (such as a

camcorder) that is designed to receive electrical power

from another 6-pin device, you will need to connect

the camcorder directly to the household AC, or use the

camcorder’s battery for power. If this is not possible,

then the camcorder will need to be connected directly

to another 6-pin device in the network that can provide

the electrical power.

6 pin to 4 pin adaptor

4 pin connector

6 pin connector

When Connecting IEEE 1394 Devices

• Do not loop the last device in the chain back to

the TV. When the device chain is looped, the TV

may not be able to work with the other devices.

• Place devices that have only a mechanical (two-

position) power switch at the end of the chain or

leave the power switch in the On position. When

turned Off, IEEE 1394 signals may not be able to

pass through the device to other devices.

• Place devices with the slowest communication

speed at the end of the chain. Sometimes the

communication speed will be marked near the

IEEE 1394 connector with an “S” number. The

higher the number, the faster the communication

speed. Devices with slow communication speed

can interfere with IEEE 1394 signals from faster

devices. When using NetCommand to set up

a digital recording between a faster and slower

device, select “Record Later”.

• Do not use an IEEE 1394 cable longer than 15

feet between each device.

• This TV is an IEEE 1394a Device. IEEE 1394b

is currently under development. This system

will provide for longer distances and multi-

room applications. Included in the IEEE

1394b systems are IEEE 1394a to IEEE 1394b

converters to maintain compatibility with this TV

and other IEEE 1394a devices.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WS65615 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info