Bedienungsanleitung Mitsubishi WS65615 (Seite 50 von 100) (Englisch)

33003

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

NetCommand

Controlled Recordings

Record To Setup

Figure 8

Your TV is able to start and stop recordings

automatically and send the signals from one external

playback device to another external recording device.

It is also able to convert digital channels and IEEE 1394

device signals to analog signals that can be recorded

on NetCommand compatible analog VHS and S-VHS

VCRs. You cannot record from an analog channel or

device or a VHS or S-VHS VCR to a digital recording

device such as a DVCR or A/V Disc.

You can schedule the recording to take place at a

later time and program the recording duration for a

minimum of 30 minutes and a maximum of 6 hours (in

30 minute increments). The default is 1 hour.

When a digital recording is being made, the TV will

direct the signals to the recording device using the

IEEE 1394 cable. When an analog recording is being

made, the TV will direct signals to the recording device.

During a recording, the TV can be powered Off. If the

TV is powered On, it must be tuned to the source that

is being recorded.

Recording Now

Can be used when viewing Antenna 1 or 2, an IEEE

1394 device, or a non-recording traditional device.

To initiate recording now:

1. Press REC (record) on the TV remote.

2. Press DEVICE on the remote control to move to the

Source Device section.

3. Press ADJUST or to select the source device

you will record from.

4. Press ENTER to confirm selection and return to the

“Record to” section.

5. In the “Record to” section, review the destination

device (VCR) and duration. Change if necessary.

6. Press REC a second time to initiate recording.

Time-Delayed Recording

To initiate a time-delayed recording:

1. Press REC (record) on the TV remote.

2. Press DEVICE on the remote control to move to the

Source Device section.

3. Press ADJUST or to select the source device

you will record from.

4. Press ENTER to confirm your Record from selection

and move to the Record to section.

5. Press ADJUST or to select the Record to

device, duration time, start time (press ENTER after

selecting hour, minutes and AM or PM to set the

time) and day. For devices that can select channels,

select the channel.

6. Select Add and press ENTER to add the recording

to the record list. If your selection is successful, a

confirmation message will be displayed. If you pick

overlapping times, day(s), or destination devices,

you will see a message stating there is a conflict.

7. To exit, press HOME after all recordings have been

added.

Figure 8. Record to screen

Copy-Protected Material

When attempting to record copy-protected material, the

Record functions of the NetCommand and IEEE 1394

systems may be prevented or stopped. If you have a

recording that is tagged “Record Once”, NetCommand

will change the tag to “Record No More”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi WS65615 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info