Bedienungsanleitung Mitsubishi XD1000U (Seite 16 von 41) (Englisch)

579853

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

EN-16

POWER

ENTER

STATUS

AUTO POSITION

COMPUTER

ZOOM/FOCUS LENS SHIFT

KEYSTONE

VIDEO

VOLUME

Viewing computer images (continued)

To stop projecting:

13. Press the POWER button.

• A conﬁ rmation message is displayed.

• To cancel the procedure, leave the projector for a while or press any button except the POWER button.

14. Press the POWER button again.

• The lamp goes out and the projector goes into a standby mode. In this standby mode, the STATUS indicator

blinks green.

15. Wait about 2 minutes for the STATUS indicator to be turned off.

• During this period of 2 minutes in the standby mode, the intake fan and exhaust fan rotate to cool the lamp.

16. Turn off the main power switch.

• The POWER indicator will go out.

• Cover the lens with the lens cap to protect it from dust.

• For safety's sake, unplug the power cord from the outlet.

Instant Shut Down

You can turn off this projector just by turning off the power switch or unplugging the power cord without pressing the

POWER button.

• Don’t shut down the projector while the STATUS indicator is blinking after the lamp lights up because the lamp’s

life may be shortened.

• Don’t turn the projector back on right after shutting it down because the lamp's life may be shortened. (Wait about

10 minutes before turning the projector back on.)

• Before shutting down the projector, be sure to close the menu screen. If you shut down the projector without

closing the menu, the setting data of the menu may not be saved.

• If you shut down the projector while controlling the projector using the network function, the application software

such as ProjectorView may fail. For details, see “User Guide of LAN Control Utility” contained in the CD-ROM.

AUTO POSITION button

When the image supplied from the computer is displaced, carry out the following procedure.

1. Display a bright image (such as a full-screen display of the Recycle Bin window).

2. When the screen saver has been enabled, disable it.

3. Press the AUTO POSITION button.

The projector automatically makes optimum positional settings for the input signal.

• If the image is not projected in the correct position even after you press the AUTO POSITION button several times,

change the settings in the SIGNAL menu to put the image in the correct position. (See page 27.)

• When you carry out this procedure with a dark image, the image may be displaced.

When connecting to a notebook computer:

When the projector is connected to a notebook computer, images may not be projected in some cases. In such

cases, set the computer so that it can output signals externally. The setting procedure varies depending on the type

of the computer. See the instruction manual of your computer.

Example of the setting procedure for external output

Press the [Fn] key and any of the keys [F1] to [F12] at the same time. (The key to be pressed depends on the type of

the computer you use.)

POWER button

Main power switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD1000U Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info