Bedienungsanleitung Mitsubishi XD2000U (Seite 29 von 41) (Englisch)

579852

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

EN-29

ENGLISH

Expand

By pressing the EXPAND button on the remote control,

you can magnify the image to view the details.

Picture in Picture (PinP)

One of the special features of this projector is the

picture-in-picture (PinP) mode. The PinP mode allows

you to view the images from different sources at the

same time.

To use the PinP mode

1. Press the PinP button on the remote control.

• When you press the PinP button with the image

from the COMPUTER/COMPONENT VIDEO IN (1

or 2) terminal displayed on the screen, the image

from the VIDEO IN or S-VIDEO IN terminal is

displayed as the sub image.

• When the image from the VIDEO IN or S-VIDEO

IN terminal is displayed, the PinP mode isn't

activated.

2. If necessary, select the desired external input

source of the sub image by using the VIDEO or

S-VIDEO button on the remote control or the VIDEO

button on the control panel.

• When the COMPUTER 1 or COMPUTER 2

button on the remote control or the COMPUTER

button on the control panel is pressed, the PinP

mode will be canceled.

3. Press the PinP button on the remote control.

• The PinP mode will be canceled.

To change the position of the sub image:

Press the  or  buttons on the remote control.

• When there is no video signal for sub image, you

can’t change the display position.

Important:

• In the PinP mode, you can’t make signal settings

using the menu.

• The PinP mode is automatically disabled when the

video signal for the main image is lost.

• The PinP mode isn't available with some input

signals. For further information, see page 39.

• The size of the sub image varies depending on the

input signal and settings.

• The PinP mode is available only when the ASPECT

ratio is set to AUTO.

• In the PinP mode, the SHUTTER and OVER SCAN

functions are disabled.

Still

To stop the motion in the image temporarily (or to dis-

play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

• Do not display a still picture for a long time because

the afterimages may persist on the screen.

To use the EXPAND mode:

1. Press the EXPAND button.

• You can select the area to be magniﬁ ed by

pressing the , , , or  button on the re-

mote control.

• You can change the magniﬁ cation of the select-

ed area by pressing the + or - button.

2. Press the EXPAND button again to exit the EXPAND

mode.

• The regular operation screen will appear.

Important:

• In the EXPAND mode, you can't adjust the volume.

• In the EXPAND mode, you can’t make signal set-

tings using the menu.

• The EXPAND mode is available only with video sig-

nals from the COMPUTER IN (IN-1, IN-2 or DVI-D)

connector. It doesn’t work with video signals from

the VIDEO IN and S-VIDEO IN connectors.

• The EXPAND mode doesn't function with some

input signals. For details, see page 39.

• In the EXPAND mode, the SHUTTER and OVER

SCAN functions are disabled.

EXPAND

Magniﬁ ed image

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD2000U Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info