Bedienungsanleitung Mitsubishi XD3200U (Seite 38 von 53) (Englisch)

493629

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

EN-38

Password function

This projector is equipped with the password function

that is designed for prevention of wrong operation by

children and restriction on operation by other than

speciﬁed users. The password function has 3 modes

as follows.

DISPLAY INPUT .......... When the projector is turned

on, the startup screen (or splash screen) will appear

and stay on the screen until the password is

entered. When the password is entered, the startup

screen will switch to the regular operation screen.

MENU ACCESS ........... All the buttons except for the

POWER button on the projector are disabled. (The

buttons on the remote control are enabled.) You

can use this mode as a measure of prevention

of wrong operation by children and restriction on

operation by other than speciﬁed users.

SPLASH ID SCREEN ... IMAGE CAPTURE and

SPLASH SCREEN in the INSTALLATION menu

become unavailable. SPLASH SCREEN will be set

to ON automatically.

To enable the password function:

1. Display the FEATURE menu.

2. Press the  or  button to select PASSWORD

FUNCTION.

3. Press the  or  button to change the mode

among DISPLAY INPUT , MENU ACCESS and

SPLASH ID SCREEN .

• When the password has already been set, the

mode won’t be changed. In such cases, press

the ENTER button to cancel the password

function and try again.

4. Press the ENTER button.

• The screen for setting the password function will

appear.

MENU ACCESS

FEATURE

opt.

LOCK

UNLOCK

5. Press the ENTER button.

• The screen for entering a password will appear.

PASSWORD

CONFIRM

O K : ENTER CANCEL : MENU

6. Enter a 4 - 8 digit password using the , ,  and

 buttons on the remote control as shown below.

(=1, =2, =3, =4)

7. Press the ENTER button.

• To cancel the procedure, press the MENU

button.

Advanced features (continued)

8. Enter the password again for conﬁrmation using the

same steps.

9. Press the ENTER button.

• If the entered passwords don’t match, an error

message will appear.

• To cancel the procedure, press the MENU

button.

To cancel the password function:

1. Display the FEATURE menu.

2. Press the  or  button to select PASSWORD

FUNCTION.

3. Press the ENTER button.

• The screen for canceling the password function

will appear.

MENU ACCESS

FEATURE

opt.

LOCK

UNLOCK

4. Press the ENTER button.

• The screen for entering the password will

appear.

PASSWORD

O K : ENTER CANCEL : MENU

5. Enter a 4 - 8 digit password using the , ,  and

 buttons on the remote control as shown below.

(=1, =2, =3, =4)

6. Press the ENTER button.

• If you enter a wrong password, an error

message will appear.

• To cancel the procedure, press the MENU

button.

Important:

• Disable the password by pressing the MENU and

ENTER buttons on the projector at the same time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD3200U Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi XD3200U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info