Bedienungsanleitung Mitsubishi xd500u st (Seite 28 von 34) (Englisch)

216090

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

EN-28

Troubleshooting (continued)

Images are not displayed correctly.

Problem Solution

Projected images are shaking.

Projected images are displaced.

• Check that the cable connected to the external device isn’t intermittent.

• Connect the cable’s plug with the external device’s connector firmly.

• Press the AUTO POSITION button.

• Some computers output out-of-spec signals on rare occasion. Adjust the SIGNAL menu. (See page 22.)

• When the input signal is a WXGA video signal, confirm the setting selected in WXGA in the FEATURE menu.

Projected images are distorted. • Adjust the projector and the screen so that they are perpendicular to each other. (See page 9.)

Projected images are dark.

• Adjust BRIGHTNESS and CONTRAST in the IMAGE menu. (See page 21.)

• Replace the lamp. (See page 25.)

Projected images are blurred.

• Adjust the focus. (See page 13.)

• Clean the lens.

• Press the W or X button on the remote control to eliminate flicker.

• Adjust TRACKING and FINE SYNC. in the SIGNAL menu. (See page 22.)

• Adjust BRIGHTNESS and CONTRAST in the IMAGE menu. (See page 21.)

• Adjust the projector and the screen so that they are perpendicular to each other. (See page 9.)

Afterimages persist on the screen.

• This phenomenon is improved by keeping projecting an evenly bright image. (Such "image burn-in" phenom-

enon where afterimages persist on the screen may occur if a stationary image is kept displayed on the screen

for a long time.)

White dots are seen on projected images. Black dots

are seen on projected images.

• This phenomenon is normal for a DLP projector and is not a malfunction. (A very small number of pixels may

visibly or invisibly be persistent all the time, but they are not a sign of system malfunctions. Over 99.99% of

the pixels are effective.)

Fine streaks are seen on projected images.

• This is due to interference with the screen surface and is not a malfunction. Replace the screen or displace

the focus a little.

• Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD

player, game console or computer you use. In such a case, you can reduce such streak noise by enabling the

LPF.

Projected images become wavy.

• Connect the plugs of the cables to external devices securely.

• Keep the projector away from equipment generating interfering radio waves.

• When the keystone adjustment is carried out, the image may not be displayed correctly because of the type

of input signal. This isn’t a product malfunction. In this case, readjust the keystone so that the amount of key-

stone correction is as small as possible.

Hue is not appropriate. • Check that the cables connected to the external devices are not broken.

Tint in projected images is incorrect.

• Check that COMPUTER INPUT in the SIGNAL menu is correctly set. (See page 20.)

• Check that the cable connected to the external device isn’t broken.

Different color tint.

• When comparing images projected by two projectors, tints in the displayed images may be different because

of variation between their optical components. This is not a malfunction.

• When comparing the image projected by this projector with those displayed on the television or PC monitor,

tints in the displayed images may be different because of difference in the range of color reproducibility. This

is not a malfunction.

Only the motion areas in the images supplied from

the computer aren’t displayed.

• This is caused by the computer being used. Contact the manufacturer of your computer.

Projected images are obscured.

• Match the output resolution of your computer with the resolution of the projector. For the method to change

the output resolution of the computer, contact the manufacturer of your computer. (See page 33.)

• Some images and texts appear obscured during the keystone adjustment. In such cases, use the projector

without applying the keystone adjustment. (See page 12.)

Projected images are flickering

• After the Power button or On button on the remote has been pressed, or the Lamp mode setting has

changed, images may be flickering until the lamp lights stably. This is an expected behavior.

• When selecting the input signal, Auto Position, and Color Enhancer, the projected image may be flickering

temporarily. This is not a product malfunction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi xd500u st Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info