Bedienungsanleitung Mitsubishi XD520U (Seite 23 von 34) (Englisch)

493631

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

EN-23

ENGLISH

Advanced features

Displaying a user-defined image during startup or mut-

ing

You can display your desired image as the startup screen (or splash

screen). Using the menu, you can also use it as the background that is

displayed while the video is muted or no signal is input.

Important:

• You can't select IMAGE CAPTURE when PASSWORD FUNC-

TION in the FEATURE menu is set to SPLASH ID SCREEN to

activate the password lock.

• You can't select IMAGE CAPTURE when the component video

signal is input.

Procedure

1. Press the COMPUTER button to select the image input to the

COMPUTER/COMPONENT VIDEO IN terminal.

2. Display your desired image.

3. Display the INSTALLATION menu.

4. Select IMAGE CAPTURE by pressing the S or T button.

5. Press the ENTER button.

• When the capture starts, the captured image will be dis-

played.

• When you press ENTER button once, any button doesn't

function until the capture completes.

• When image resolution is lower than XGA(1024 x 768), the

image is captured by adjusting its resolution to XGA.

• When image resolution is higher than XGA(1024 x 768), the

image area of XGA is only captured.

Important:

• You can't change the new startup screen back to the original

screen. (Even when you select RESET ALL in the FEATURE

menu, the factory default screen is no longer effective.) When you

want to change the startup screen again, capture another image.

• The captured images will be deleted at the same time as pressing

the ENTER button. If you pressed ENTER button wrongly, try to

capture the same images again.

• The captured image is displayed from the next startup. If the cap-

tured image isn't displayed, check to see if SPLASH SCREEN in

the INSTALLATION menu is set to OFF. (See page 18.)

• To display the captured image while the video is muted, set AV

MUTE MODE in the INSTALLATION menu to IMAGE. (See page

18.)

• When BACK COLOR in the INSTALLATION menu is set to

IMAGE, the captured image is displayed while no signal is input.

• Some images can't be captured correctly because of their signal

type.

Freeze

To stop the motion in the image temporarily (or to dis-

play a still image):

Press the FREEZE button on the remote control.

• The image freezes temporarily.

To resume the motion in the image:

Press the FREEZE button on the remote control again.

Important:

• Do not keep displaying a still picture for an extended period of

time, as the afterimages may linger on the screen.

Page-up and page-down

You can go up and down the pages of a presentation projected from a

computer using the remote control. Switch the pages using the PAGE

UP or DOWN button on the remote control.

Connection

To manipulate images projected from the computer using the remote

control, connect the projector with the computer as shown below.

• When the projector is connected with the computer via the USB

port, the "Page up/down" function works if the computer supports

the USB connection as a standard feature. (In some cases, it may

not work.)

• "Page up/down" function when connecting with the USB cable

cannot be supported in the Macintosh computer.

• Wait for the lamp to light up before connecting the USB cable.

• When the projector is connected using a longer cable, the image

may not be projected correctly.

• When you use a longer cable, the use of the repeater is recom-

mended.

Password function

This projector provides the password function that is intended to pre-

vent wrong operations by children and set controlled access for speci-

fied users.

DISPLAY INPUT............When the projector is turned on, the star-

tup screen (or splash screen) appears and

stays on the screen until the password is

entered. When the password is entered,

the startup screen switches to the regular

operation screen.

MENU ACCESS ............All the buttons except for the POWER but-

ton on the projector are disabled. (The

buttons on the remote control are

enabled.) You can use this mode to pre-

vent wrong operations by children and set

controlled access for specified users.

SPLASH ID SCREEN....IMAGE CAPTURE and SPLASH

SCREEN in the menu become unselect-

able. SPLASH SCREEN is set to ON

automatically.

To enable the password function:

1. Display the FEATURE menu.

2. Press the S or T button to select PASSWORD FUNCTION.

3. Press the W or X button to change the mode among DISPLAY

INPUT , MENU ACCESS and SPLASH ID SCREEN .

• When the password has already been set, the mode never

changes. Press the ENTER button to cancel the password

function and try again.

4. Press the ENTER button.

• The screen for setting the password function appears.

INSTALLATION

opt.

SPLASH

SCREEN

WALL SCREEN

AUTO POWER

OFF

BACK COLOR

LAMP MODE

OFF

BEIGE

BLUE

AUTO POWER

STANDARD

OFF

IMAGE

REVERSE

IMAGE

CAPTURE

BLACK

MUTE MODE

USB

USB 4-pin

(type B)

USB 4-pin

(type A)

to USB port

USB cable

(option)

MENU ACCESS

FEATURE

opt.

LOCK

UNLOCK

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD520U Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info