Bedienungsanleitung Mitsubishi XD700U (Seite 50 von 61) (Englisch)

493677

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN-50

Connection

For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM.

When Standby Mode of the Efﬁcient Mode menu in the Installation menu of the projector is set to Low, the LAN

network is disabled. To enable the LAN network, set Standby Mode to LAN. (See page 27.)

Conﬁgure the initial network settings ﬁrst.

Youcanconguretheinitialsettingsusingtheprojectormenu(seepages34to38)orProjectorViewGlobal+.For

detailsofProjectorViewGlobal+,see“LANcontrolUTILITYoperationmanual”intheCD-ROM.

Using the User Manual

The User Manual for LAN Control Utility is prepared in the Portable Document Format (PDF) in the CD-ROM.

Opening the User Manual:

1. Load the CD-ROM into the CD-ROM drive.

2. Open CD-ROM “PROJECTOR.”

3. Double-click on “MANUAL_LAN.HTML” within the CD-ROM. A language selection list for the User Manual will be

displayed.

4. Move the mouse pointer to the desired language and click.

PJLink™ supported commands

The table below shows commands to control the projector using the PJLink™ protocol.

Command Description Remark (Parameter)

POWR Power control 0=Standby

1 = Power on

POWR? Inquiry about the power state

0=Standby

1 = Power on

2 = Cooling down

3 = Warming up

INPT Input switching 11 = Computer1 12 = Computer2

21 = Video 22 = S-Video

31 = HDMI

41 = PC Less Presentation 42 = USB Display

51 = LAN Display

INPT? Inquiry about input switching

AVMT Mute control 30=Videoandaudiomutedisable

31 = Video and audio mute enable

AVMT? Inquiry about the mute state

ERST? Inquiry about the error state 1stbyte:Fanerror,0or2

2ndbyte:Lamperror,0to2

3rdbyte:Temperatureerror,0or2

4thbyte:Coveropenerror,0or2

5thbyte:Always0

6thbyte:Othererror,0or2

0to2meanasfollows:

0=Noerrordetected,1=Warning,2=Error

LAMP? Inquiry about the lamp state

1st value (1 to 5 digits): Cumulative lamp operating time (This item shows

a lamp operating time (hour) calculated based on

that Lamp Mode is Low.)

2ndvalue:0=Lampoff,1=Lampon

INST? Inquiry about the available inputs The following value is returned.

“11 12 21 22 31 41 42 51”

NAME? Inquiry about the projector name The projector name set on the Network Conﬁg menu or the Crestron

RoomView Setup window is returned.

INF1? Inquiry about the manufacturer name “MITSUBISHI” is returned.

INF2? Inquiry about the model name “XD700U”or“WD720U”isreturned.

INF0? Inquiry about other information No other information is available. No parameter is returned.

CLSS? Inquiry about the class information “1” is returned.

• This projector is fully compliant to the speciﬁcations of JBMIA PJLink™ Class 1. It supports all the commands deﬁned by

PJLink™Class1,andthecompliancehasbeenveriedwiththePJLink™standardspecicationsVersion1.0.

Advanced features (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD700U Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mitsubishi XD700U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info