493655
41
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
EN-41
INFORMATION menu
60.00 Hz
RESOLUTION
1024 x 768
VERTICAL
FREQUENCY
48.36 kHz
5WIRE
HORIZONTAL
FREQUENCY
SYNC. TYPE
SERIAL NUMBER
INFORMATION
1
1
2
2
FILTER TIME
*****
H /
****
TIMES
********
...
NEXT LAMP RELAY
COMPUTER1INPUT
opt.
*
D
**
H
RG
HV
B
LAMP 1 TIME (LOW)
LAMP 2 TIME (LOW)
****
H
****
H
ITEM DESCRIPTION
LAMP 1 TIME (LOW)
This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP 1
is LOW.
When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than
the actual time.
When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time
exceeding 10 hours is indicated by the actual hours.
When the lamp operating time reaches 3000 hours, the bar turns to yellow. When it
reaches 3800 hours, the bar turns to red.
The icon displayed to the right of the bar shows the lamp status.
Yellow: On, Red: End of lamp life or error such as illumination failure, Black: Off
LAMP 2 TIME (LOW)
This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP 2
is LOW.
When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than
the actual time.
When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time
exceeding 10 hours is indicated by the actual hours.
When the lamp operating time reaches 3000 hours, the bar turns to yellow. When it
reaches 3800 hours, the bar turns to red.
The icon displayed to the right of the bar shows the lamp status.
Yellow: On, Red: End of lamp life or error such as illumination failure, Black: Off
NEXT LAMP RELAY
The next lamp relay time is displayed.
FILTER TIME
The fi lter operation time and the cleaning count are displayed.
SERIAL NUMBER
The serial number of the projector is displayed.
INPUT
Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION
Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY
Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FREQUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE
Indicates the type of the sync signal for the currently projected video signal.
NEXT LAMP RELAY isn’t displayed when LAMP RELAY is OFF or LAMP SELECT is LAMP 1 or LAMP 2 in the INSTALLATION
1 menu.
Menu operation (continued)
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi XD8100U wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info