Bedienungsanleitung Mitsubishi XD8100U (Seite 69 von 75) (Englisch)

493655

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

EN-69

Troubleshooting (continued)

Images are not displayed correctly. (continued)

Problem Solution

Tint in projected

images is incorrect.

• Check that COMPUTER INPUT in the SIGNAL menu is correctly set. (See page 39.)

• Check that the cable connected to the external device isn’t broken.

Different color tint. •

When comparing images projected by two projectors, tints in the displayed images may be

different because of variation between their optical components. This is not a malfunction.

• When comparing the image projected by this projector with those displayed on the

television or PC monitor, tints in the displayed images may be different because of

difference in the range of color reproducibility. This is not a malfunction.

Only the motion areas

in the images supplied

from the computer

aren’t displayed.

• This is caused by the computer being used. Contact the manufacturer of your

computer.

Projected images are

obscured.

• Match the output resolution of your computer with the resolution of the projector.

For the method to change the output resolution of the computer, contact the

manufacturer of your computer. (See page 73.)

• Some images and texts appear obscured during the keystone adjustment. In such

cases, use the projector without applying the keystone adjustment. (See page 14.)

• When SUPER RESOLUTION is ON, the displayed image may be obscured. Set it to

OFF. (See page 44.)

Noise appears around

the image.

• In some images such as DVD, noise may appear around the recorded image. In this

case, decrease the setting value of OVER SCAN of the SIGNAL menu. (See page 39.)

Others

Problem Solution

The exhaust vents

emit warm air.

• This air comes out after cooling the inside of the projector. You may feel hot, but this

is not a malfunction.

The menu can’t be

used.

• The microcomputers inside the projector may be wrongly operating because of noise.

J Turn off the main power, wait about 10 minutes, and turn on the main power again.

“TEMPERATURE!!” is

displayed.

• This indication appears when the ambient temperature rises high. When the ambient

temperature stays high, the lamp goes out.

J Eliminate any causes of the rise in the ambient temperature.

• This indication appears when the air inlet or outlet grille is blocked. When they are

kept blocked, the lamp goes out.

J Remove the objects blocking the air inlet or outlet grille.

The

mark appears. •

This mark appears when ineffective operation is carried out. This isn’t a product malfunction.

The remote control

doesn’t function easily

or at all.

• Check that the batteries are loaded in the remote control or the batteries are not

weak. (See page 6.)

• Check that the remote control sensor isn’t exposed to direct sunlight or ﬂ uorescent

light. (See page 9.)

• Use the remote control within its operation range. (See page 9.)

• Use the remote control at least 10 cm away from the projector.

• Check that the CONTROLLER ID matches with the PROJECTOR ID. (See pages 10

and 60.)

• Check that the projector isn’t controlled by a control panel or other device that is

connected to the REMOTE 1 IN terminal. (See page 61.)

• When the terminal cover is attached, remote control may not work properly from

behind the projector.

J Remove the terminal cover.

The buttons on the

projector (except for

the POWER button)

don’t function.

• PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS

enable the password lock.

J Cancel the password lock or contact the person in charge of management of the

projector. (See page 56.)

• Check that the projector isn’t controlled by a control panel or other device that is

connected to the REMOTE 1 IN terminal. (See page 61.)

Abnormal sound is

heard.

• Because the color wheel spins at a high speed, metallic sounds may be heard in rare

occasions. Such symptom is not a malfunction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD8100U Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info