Bedienungsanleitung Mitsubishi XD95U (Seite 24 von 45) (Englisch)

493634

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

EN-24

Optimizing the image

Selecting a picture mode

The projector is preset with several predefined picture modes so that you can

choose one to suit your operating environment and input signal picture type.

To select a operation mode that suits your need, you can follow one of the

following steps.

•Press MODE/ENTER on the remote control or projector repeatedly until

your desired mode is selected.

• Go to the PICTURE > Setting menu and press / to select a desired

mode.

Picture modes for different types of signals

The picture modes available for different types of signals are listed below.

PC input signals: D-Sub / Comp. (analog RGB)

1. Brightest mode: Maximizes the brightness of the projected image. This mode is suitable for environments

where extra-high brightness is required, such as using the projector in well lit rooms.

2. Presentation mode: Is designed for presentations. The brightness is emphasized in this mode to match PC and

notebook coloring.

3. Photo mode (Default): Maximizes the purity of RGB colors to provide true-to-life images regardless of

brightness setting. It is most suitable for viewing photos and for viewing PC graphic and drawing applications

such as AutoCAD.

4. Theater mode: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the

PC input for best viewing in a blackened (little light) environment.

5. User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting

the User 1/User 2 mode" on page 24 for details.

Video input signals: S-Video, Video, D-Sub / Comp. (YPbPr)

1. Dynamic mode: Is suitable for playing gamebox-based video games in a normal living room lighting level

environment.

2. Standard mode (Default): Is appropriate for viewing colorful movies, video clips from digital cameras or

DVs.

3. Theater mode: Is suitable for enjoying dark movies or DVD movies best viewed in a blackened (little light)

home cinema or lounge room environment.

4. User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting

the User 1/User 2 mode" on page 24 for details.

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need. You can use

one of the picture modes (except the User 1/User 2) as a starting point and customize the settings.

1. Press MENU to open the On-Screen Display (OSD) menu.

2. Go to the PICTURE > Setting menu.

3. Press / to select User 1 to User 2.

4. Press to highlight Color.

This function is only available when User 1, or User 2 mode is selected up in the Setting sub-menu item.

5. Press / to select a picture mode that is closest to your need.

6. Press to select a sub-menu item to be changed and adjust the value with / . See "Fine-tuning the image

quality in user modes" below for details.

7. When all settings have been done, highlight Save Settings and press MODE/ENTER to store the settings.

8. The confirmation message 'Setting Saved' displays.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XD95U Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info