493634
33
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
EN-33
ENGLISH
FUNCTION
(default setting/value)
DESCRIPTION (default setting/value)
Quick Auto Search
(On)
See "Switching input signal" on page 20 for details.
Presentation Timer
(Off)
Reminds the presenter to finish the presentation within a certain time
frame. See "Setting the presentation timer" on page 27 for details.
Language
(English)
Sets the language for the On-Screen Display (OSD) menus. See "Using
the menus" on page 18 for details.
Projector Position
(Front Table)
See "Choosing a location" on page 11 for details.
Auto Power Off
(Disable)
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See "Setting Auto Power Off" on
page 36 for details.
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See "Hiding the image" on
page 28 for details.
Panel Key Lock
(Off)
Disables or enables all panel key functions except Power on the
projector and keys on the remote control. See "Locking control keys"
on page 28 for details.
Timer Controller
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Splash Screen
(MITSUBISHI logo)
Allows you to select which logo screen will display during projector
start-up. Three options are available: MITSUBISHI logo, Black screen,
or Blue screen.
Quick Cooling
(Off)
Selecting On enables the function and the projector cooling time will be
shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
High Altitude Mode
(Off)
A mode for operation in high altitude areas. See "Operating in a high
altitude environment" on page 29 for details.
Menu Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last
key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
Lamp Settings
Lamp mode (Standard)
See "Setting Lamp mode as Low" on page 36 for details.
Reset lamp timer
See "Resetting the lamp timer" on page 39 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 36 for details on how
the total lamp hour is calculated.
3. SOURCE
menu
4. SYSTEM SETUP: Basic menu
I
I
5. SYSTEM SETUP: Advanced menu
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mitsubishi XD95U wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info