Bedienungsanleitung Mitsubishi XL6600U (Seite 11 von 48) (Englisch)

493641

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

EN-11

Setting up your projector (continued)

LENS SHIFT button

To adjust the positions of the projector and the screen, use LENS SHIFT button.

1. Press the LENS SHIFT button.

• The LENS SHIFT menu appears at the center of the screen.

2. Press the

button to move the image position.

• When the

button is pressed, the image moves down.

• When the

button is pressed, the image moves up.

• When the

button is pressed, the image moves to the right.

• When the

button is pressed, the image moves to the left.

• When the ENTER button is pressed while the LENS SHIFT menu is displayed, the shift mode can be switched

between FAST and STEP. When FAST is selected, the lens shifts in a large amount with the

button,

and it shifts in a small amount when STEP is selected.

• When the LENS SHIFT menu is displayed while no video signal is input to the projector, a crosshatch appears on

the entire screen.

• Be careful not to be caught in the opening in the lens while the lens is moving.

• While the lens shift is working, the screen may ﬂ icker.

Adjusting the projection angle

For the best projection, project images on a ﬂ at screen installed at 90 degrees to the ﬂ oor. If necessary, tilt the

projector using the two adjustment feet on the bottom of the projector.

1. Rotate the adjustment feet for ﬁ ne adjustment.

After using the projector:

2. Put the adjustment feet back into the projedtor by rotating the adjustment feet.

When ﬁ ne streaks are seen on projected images

This is due to interference with the screen surface and is not a malfunction. Replace the screen or displace the focus

a little. (See page 15 or 20 for focus adjustment.)

When projected images are distorted to a trapezoid

When the screen and the projector are not placed perpendicularly to each other, projected images become

trapezoidal. If you cannot make the projector and the screen perpendicular to each other by mechanical adjustments,

adjust keystone.

To adjust keystone:

Press the KEYSTONE button on the projector or the

remote control to display KEYSTONE, and adjust the

image by pressing the

button (or VOLUME

+ or - button on the remote control).

LENS SHIFT

FAST

SELECT : ENTER

Adjustment feet

Screen

In the following cases (for front projection):

Press the

(or -) button.

Press the

(or +) button.

Press the

button.

Press the

button.

Important:

• For proper keystone adjustment results, reset the lens to the factory-adjusted position using LENS SHIFT RESET

in the INSTALLATION menu before carrying out keystone adjustment. (See page 24.)

• When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean

a projection angle.

• The allowable range of the adjustment value in the keystone adjustment varies depending on the installation

conditions.

• When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight

lines may bend in images with complicated patterns. They are not due to product malfunctions.

• When the keystone adjustment is performed, the displayed image may be distorted.

• Depending on the installation conditions of the projector and the screen, a perfect rectangular image and the

proper aspect ratio may not be obtained.

• Noise may appear on the screen during the keystone adjustment because of the type of the video signal being

projected and the setting values of the keystone adjustment. In such cases, set the keystone adjustment values in

the range where the image is displayed without noise.

• When horizontal and vertical keystone adjustments are performed in combination, the adjustable range becomes

narrower than in the case when they are performed separately.

• In the keystone adjustment with the option lens, the proper aspect ratio may not be obtained.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XL6600U Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info