Bedienungsanleitung Mitsubishi XL6600U (Seite 32 von 48) (Englisch)

493641

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

EN-32

Set the background color

(Set the background color only when you set the im-

age size to x1 or x2.)

6. Select BACK COLOR by pressing the

but-

ton.

7. Select your desired color for the background (GRAY,

RED, GREEN, BLUE, BLACK, WHITE, RED50%,

GREEN50%, or BLUE50%) by pressing the W or X

button.

Set the image size

8. Select SIZE by pressing the

button.

9. Select x1, x2, or FULL by pressing the W or X but-

ton.

Capture the image

10.

Select CAPTURE by pressing the

button.

11.Press the ENTER button.

• A red frame appears. (The size of the red frame

is 320 x 240 pixels.)

12.Adjust the size of the image to be captured so that

such image stays within the red frame.

• Press the

, W or X button to move the red

frame.

• You can’t move the red frame outside the

screen.

13. Press the ENTER button twice.

• Image capture will start.

• Press the MENU button to cancel the proce-

dure.

• When the image capture completes, the cap-

tured image will be displayed for three seconds.

Important:

• You can’t change the new startup screen back to

the original startup screen. (Even when you select

RESET ALL in the FEATURE menu, the factory

default screen isn’t available any longer.) When you

want to change the startup screen again, capture

another image.

• The captured image will be displayed from the next

startup. If the captured image isn’t displayed, make

sure that the setting of SPLASH SCREEN in the

INSTALLATION menu isn’t OFF. (See page 24.)

• To display the captured image while the video is

muted, set MUTE MODE in the INSTALLATION

menu to IMAGE. (See page 24.)

• When BACK COLOR in the INSTALLATION menu is

set to IMAGE, the captured image will be displayed

while no signal is supplied.

• In the mute mode, or when no signal is input, it

takes longer time to display the captured image.

•

Some images can’t be captured correctly because

of their signal type.

CAPTURE : ENTER + ENTER

CANCEL : MENU

CAPTURE : ENTER X2

CANCEL : MENU

CAPTURE : ENTER X2

CANCEL : MENU

CAPTURE : ENTER X2

CANCEL : MENU

CAPTURING IMAGE !

x1 x2 FULL

Setting of the image displayed

during startup or muting

You can display your desired image as the startup

screen (or splash screen). Using the menu, you can

also use such image as a background that is displayed

while the video is muted or no signal is supplied.

Important:

• You can’t set IMAGE CAPTURE when PASSWORD

FUNCTION in the FEATURE menu has been set to

SPLASH ID SCREEN to enable the password lock.

• You can’t set IMAGE CAPTURE when the compo-

nent video signal is inputted.

Setting procedure

1. Press the COMPUTER button to select the image

supplied to the COMPUTER/COMPONENT VIDEO

IN terminal.

2. Display your desired image.

3. Display the INSTALLATION menu.

4. Select IMAGE CAPTURE by pressing the

button.

5. Press the ENTER button.

• The setting menu will be displayed.

Advanced features

opt.

INSTALLATION

CUSTOM IMAGE CAPTURE

BACK COLOR

SIZE

GRAY

CAPTURE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mitsubishi XL6600U Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info