2
CONTENTS
1. General description 4
2. Standard behaviour 5
2.1 ThermoGuard with Mobeye SIM and Internet Portal 5
2.2 Mobeye ThermoGuard with own SIM card 6
3. Getting started 7
3.1 Open the casing and insert the SIM card 7
3.2 Connect the temperature sensor 8
3.3 Insert the batteries 8
3.4 Connect an external power supply (optionally) 8
3.5 Connect a sensor to the input (optionally) 9
3.6 Network connection and program mode 9
4. Programming when using the Mobeye SIM and portal 10
4.1 Sign up in the Mobeye Internet Portal 10
4.2 Register the Mobeye SIM card 10
4.3 Configuration and synchronisation 11
4.4 Basics of the Mobeye Internet Portal 11
4.5 How to activate the ThermoGuard 13
4.6 System reset 14
5. Possible settings 15
5.1 Alarm phone numbers 15
5.2 Test message 15
5.3 Minimum and/or maximum temperature limit 16
5.4 Temperature delay time 16
5.5 Temperature calibration 16
5.6 Temperature unit 16
5.7 Input type 16
5.8 Alarm delay time 17
5.9 Inactive time 17
5.10 Alarm repeat time 17
5.11 Power failure message 17
5.12 Power failure delay time 17
5.13 Automatic arming / disarming 18
5.14 Buttonlock 18
5.15 Low power mode 18
5.16 Call and/or SMS (own SIM cards) 19
6. Programming when using own SIM card 20
6.1 Program mode 20
6.2 Programming the settings by SMS 20
6.3 Program at least one telephone number 21
6.4 Program threshold values for the temperature 21
7. List of SMS commands for programming with own SIM 23
7.1 List of SMS commands 23
7.2 How to activate the ThermoGuard 25
7.3 System reset 25
7.4 SMS reports when using own SIM card 26
7.5 Technical messages 27
8. Status feedback 28
