21
6. PROGRAMMING WHEN USING OWN SIM CARD
If your own SIM card is used, programming proceeds via SMS commands.
For this purpose the communication module requires network connection.
6.1 PROGRAM MODE
If the CML4255 is connected to an external power supply, it has continuous
network connection and is permanently in program mode.
A battery-operated Mobeye CML4255 switches to the program mode after
re-inserting the batteries or pressing the button at the back for 5 seconds.
While searching for the network connection the outside LED flashes green
and red. This process normally takes 10-30 seconds. When the network has
been established the LED will first blink green rapidly and next stay green
(or flashes 1 sec. on/1 sec. off in case the unit has not been configured yet).
In this program mode the device is ready to receive commands and
settings. In a battery-operated unit a time-out occurs if no correct
command is received for 3 minutes, after which the communication module
switches off in order to save the batteries. In this low power mode the LED
flashes once per 3 seconds to indicate it is armed.
6.2 PROGRAMMING THE SETTINGS BY SMS
Using your own SIM, the settings are programmed in by SMS text
messages:
1. Make sure the CML4255 is in program mode (please refer to 6.1).
2. Send an SMS text message with the (security) code and the command.
3. The green LED blinks 3 times to indicate the successful configuration. In
case of an incorrect command, the red LED flashes 5 times.
SMS messages have the following content: CODE COMMAND:OPTION
Example: 1111 TEL1:0044772345678
- CODE stands for the security code, factory setting is 1111.
- Do not forget the space character between the code and command.
- The commands are case insensitive.
- Several commands may be combined in one SMS message (with a
maximum of 160 characters) by placing a # between the commands.
