7
3.2 INSERT THE BATTERIES
Insert the batteries in the module. Use the +/- indication for the correct
placement. If you replace the batteries the settings will not be deleted, since
they are stored in the device memory.
After placing the SIM card and batteries the Mobeye MiniPir will search for
the network. The outside LED flashes green and red. This process normally
takes 10-30 seconds, in a new device this can take some minutes. When the
network has been established the LED will first blink green rapidly and next
stay green (or flashes 1 sec. on/1 sec. off in case the unit has not been
configured yet).
A time-out occurs after 3 minutes, after which the communication module
switches off in order to save the batteries. It will search for network
connection once it needs to send notifications. It can also been forced to
establish a network connection by re-inserting the batteries or holding the
tag against the reader for 5 seconds.
Close the casing.
3.3 PROGRAMMING
The settings and alarm notifications are prepared in the online Mobeye
Internet Portal. This is explained in chapter 4.
