Bedienungsanleitung Momon Tourinot (Seite 9 von 11) (Englisch, Italienisch)

769166

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

1716

or to the lying position, pull the handle in the back part of the backrest

upwards, select the required position and release the handle. The back-

rest is equipped with a spring-loaded auto-lock mechanism that does

not require the handle to be lifted when lifting the backrest from lying

to sitting position.

9. Do not allow the child to stand on the seat as it may damage the

stability of the stroller and cause the stroller to fall down.

10. Do not carry the pram holding the hood, upper edge of the back-

rest, footrest or the element creating the pram version. Do not use the

pram on steps or leave the pram with the child on uneven surfaces

(even with the brake on) as it may go down. Carrying the pram up or

down the steps, placing the pram to the bus, etc. should be carried out

with the aid of another person. The person holding the pram handle

tube passes the obstacle ﬁrst while holding the pram handle tube, and

the person holding the other end of the pram should grasp the pram

by a stable element such as a ﬁxed upright of the frame. When carrying

the pram downstairs the person who is helping comes down ﬁrst.

11. When the pram is not in use, the brake should always be engaged.

Use of the brake requires lowering the brake level and checking the

effectiveness of the brake. Before moving the pram, ensure that the

pram wheels are not locked; moving the pram with locked wheels

could cause damage to locking elements.

12. When passing obstacles at of varying levels (e.g. high doorsteps),

bring both wheels closer together (of the same axle) simultaneously

pressing the handle tube down when passing the obstacle with front

wheels. When passing higher obstacles (e.g. access to curbs of a side-

walk), place the front wheels of the pram slightly above the level of the

obstacle surface simultaneously by pressing the handle tube down and

pulling it towards the body, move the rear wheel closer to the obstacle,

lower the front wheels and move the rear wheels over the obstacle by

lifting the pram up. Any collision with hard objects or surfaces may

damage (deform) elements connecting the frame or damage frame el-

ements causing a lack of proper alignment.

13. The load of the basket fastened to the pram frame should not ex-

ceed 2 kg. Accessible load of the bag, if is equipped, hung on the pram

handle is 1.5 kg. Pockets of the pram are for decorative purposes only,

no objects of total weight exceeding 0.15 kg should be placed within

each pocket or weight of 0.35 kg for all pockets.

14. Keep the pram elements clean. Dirt on the frame should be re-

moved with a damp sponge and then wiped with a dry cotton cloth.

Do not use caustic, sharp, or hard agents for cleaning as these may

be harmful to the pram elements (discolouration, scratches, etc.). It

is recommended to use cleaning agents appropriate for a particular

surface. In the case of any dirt on the pram cover, remove it with the

use of a damp sponge, adding a delicate cleaning agent. Avoid over

wetting the stroller seat, bottom of the carry cot, and bottom of addi-

tional sleeping bag (pram of changeable function) as this may cause

deformation of stringer ring elements.

15. To avoid weepings or smudges which may occur after rainfall, for

instance, secure the pram against over soaking by the use of rain cover

for the whole pram. It is recommended to protect the pram against the

effects of strong sunlight. The manufacturer cannot accept responsi-

bility for deterioration to the pram cover, which result from failure to

follow these recommendations.

16. Before mounting and dismounting the wheels, lift the locking

mechanism of the brake upwards (unblocked break). We recommend

that the pram axles be kept clean. Where prams are equipped with

wheels without bearings, pram axles should be kept lubricated with a

thick agent (cup grease, machine oil) to reduce friction on tube ends.

In models equipped with wheels with bearings, it is recommended to

blow with compressed air before to lubricate the axles with a lubricat-

ing agent e.g. WD40. In the case of inﬂating wheels, we recommend

that the inner tube pressure must be maintained at a constant level not

exceeding 0.6 at or of the value indicated on the wheel frame.

17. WARNING: Take care to keep clean the mechanism of the rear

brake using a compressed air gun and using lubricating agents such as

WD40, in order to avoid the hardening of the pedals and the breakage /

consumption of the brake discs.

18. WARNING: Accessories or spare parts that the manufacturer or

distributor has not approved must not be used.

ENEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Momon Tourinot Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info