Bedienungsanleitung Monacor DMIX-20 (Seite 23 von 41) (Deutsch, Englisch)

632510

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English

11 Keys AUX 1– 4 and FX 1/ 2 to select an AUX way or effect way for

additional settings or to select a Send control [depending on the

setting of the key AUX-FX MODE (12)]

12 Key AUX-FX MODE to switch between the two functions available

for the keys AUX 1– 4 and FX 1/ 2 (11):

When the key AUX-FX MODE is illuminated, the keys AUX 1– 4

and FX 1/ 2 can be used to select an AUX/FX Send control for the

current channel�

When it is not illuminated, the keys AUX 1– 4 and FX 1/ 2 can be

used to select an Aux way or effect way for additional settings�

13 Key DCA to deﬁne the level control groups:

The key will start ﬂashing when pressed for the ﬁrst time� While

the key keeps ﬂashing, select the desired channels for the DCA

group selected� To complete the group deﬁnition, press the key

DCA again; the key will extinguish�

14 Key FX MUTE to mute the two internal effect ways

15 Volume controls CTRL ROOM (control room), HP1 and HP2 (head-

phones) for the signal of the Solo bus

16 Keys to call up superordinate screen views

METER Overview of all level settings and signal levels

SYSTEM

General system settings;

when pressed for a second time: overviews of all signal

path assignments

17 Key PFL (Pre-Fader Listening) to change the signal pickup setting

for the Solo bus

Key illuminated: the signals will be picked up ahead of level setting

and independently of muting

Key not illuminated: the signals will be picked up after level setting

18 Rotary knob PARAMETER ADJUST to adjust a parameter selected

and direction keys ,





, to select a parameter or channel,

to change a value etc� (functions will deviate, depending on the

screen view selected)

Key FLAT EQ to reset an equalizer setting, depending on the screen

view selected

20 Key (TAP)/ ENTER to conﬁrm conﬁrmation prompts and, by rhyth-

mically pressing the key, to deﬁne echo times for the delay effects

of the effect processors

21 Key GEQ to call up the screen view for the graphic equalizers

22 Keys to call up speciﬁc screen views

MIXER

Overview of all input channels and output channels

Setting options:

– Level

– Position in stereo panorama /Stereo balance

– Signal path assignments

– Muting

– Solo selection

– Linkage of two adjacent channels as a stereo pair

Press the key repeatedly to go from the overall view to

the partial view (with long faders) and vice versa�

ASSIGN

Overview of the settings of the channel selected

For the input channels and the effect ways FX1/ 2, press

the key repeatedly to go to a second view�

GATE /

COMP

Settings of the dynamic-range processors noise gate/

compressor for the channel selected

For the input channels and the effect ways FX1/ 2, press

the key repeatedly to go from the noise gate to the

compressor and vice versa�

PEQ/

GEQ

Settings for sound correction of the selected channel

by means of high-pass ﬁlter, low-pass ﬁlter and four

parametric ﬁlters

Press the key repeatedly to change between the view

of a graphic equalizer for the sum channel MAIN, for a

subgroup or for an Aux way�

FX 1/ 2 Settings of the two effect processors

Press the key repeatedly to go from FX1 to FX2 and

vice versa�

DIGITAL

Settings for the inputs and outputs of the optional

32-channel digital audio interface

48 V

Screen view to switch the phantom power supply for

the individual microphone inputs on and off

Caution: Never switch on the phantom power supply when

audio sources with unbalanced outputs are connected; other-

wise, the audio sources may be damaged�

Prior to switching the phantom power supply on or off, always

mute the channel and adjust the outputs for the headphones and

the control room (15) to a low volume� High-volume switching

noise may damage your hearing and the speakers�

23 Keys for signal path assignments of the channel selected

SOLO Will switch the channel to the Solo bus which is used

to separately monitor the signals via the headphone

outputs, the output CTRL ROOM and the level indicator

SOLO METER (3)

MUTE Will mute the channel

PAN

Will place the signal of the channel in the stereo

panorama

The adjustment is made by means of the rotary knob

PARAMETER ADJUST (18)� For stereo inputs or mono

inputs linked as a stereo pair, the key PAN is used to

adjust the balance of the stereo signal�

MAIN Will route the signal to the sum channel MAIN

SUB 1– 4 Will route the signal to the appropriate subgroup

LINK

Will link the mono channel selected and its adjacent

channel as a stereo pair

The settings of the channel selected will be adopted

by the other channel� As long as the two channels are

linked, all settings will apply to both channels (excep-

tions: input gain, phantom power supply)

Motor fader to adjust the signal level of the channel selected (input

channel, Aux way, effect way, subgroup, sum channel MAIN)

When another channel is selected, the motor fader will automati-

cally go to the value of the channel selected� When this parameter

is changed via the screen or the rotary knob PARAMETER ADJUST

(18), the setting of the motor fader will change accordingly�

25 Controls for the signal level of the subgroups SUB 1– 4 (AUX 5 – 8)

and of the sum channel MAIN

26 Headphone output HP 1 (6�3 mm stereo jack) to monitor a signal

by means of the Solo bus

Monacor DMIX-20 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info