Bedienungsanleitung Monacor DMR152 (Seite 15 von 40) (Englisch)

632634

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

User Manual

 [Bit rate] include three options – Best, Good and Normal.

 [Frame rate] include two options – Fixed and Manual. When set to “Manual” and click [Frame rate setup]

option, you may allocate the frame rate for each channel.

 [Audio] option allows you turn audio on/off.

 [Mode] allow you select record modes, including Always and Scheduled. To record 24 hours a day set the

[Mode] to Always. To record on motion or a set schedule, select the [Schedule] option.

 [Pack time] indicates maximum continuous record time (15, 30, 45 and 60 min).

 [Copy to] allow you copy current settings to any other channel.

When setting [Mode] to Schedule, the schedule screen will appear as shown in Picture 5-7.

[Record CH] options include All, CH-1, CH-2, CH-3 and CH-4 in turn. Please click the channel you need.

To setup weekly schedules, tick-select the box of the record status you want (Alarm, General, or No

Record) and then click on each box in the schedule time line that you want this method to apply to. You can

use the [From – To] pull-down menus and Copy button to copy settings from one day to another day or all

days.

After you complete the schedule you activate it by clicking the [Apply] button.

You can also click the [Default] button to use the system defaults.

Explanation: On the [record] Set and [Search] mode, original color stands for no record, “Red” stands for

alarm record and “Green” stands for normal record.

5.3.3 Network Setup

Enter into [Main MenuNetwork Setup] to setup the network configuration (Shown as picture 5-8):

After selecting network mode - such as DHCP, PPPOE or static allocation- and setting up web ports，you

can visit DVR remotely through a network or internet.

UPnP (Universal Plug and Play) function: If router supports UPnP function and set <UPnP> to On, system will

automatically forward port to router.

DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS.

When selecting DHCP the router will allocate DVR IP address automatically after you exit the menu. The

IP address of the DVR might change whenever the unit is turn on. Therefore, you need to forward

corresponding IP address and web port when you remotely visit the DVR each time.

Processing step:

1. Select network type (DHCP);

2. Input media port and web port and media port is not equal to web port;

3. Click <Save> button and restart, now DVR will capture IP address automatically;

4. If <UPnP> function is set to “Off”, you can forward IP address captured by DVR to router and set

relative parameter shown as Picture 5-11; If your router support <UPnP> function and set to “on”, you

no need to perform this step 4;

5. You visit the DVR remotely.

Picture 5-8

Picture 5-9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Monacor DMR152 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Monacor DMR152

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info