Bedienungsanleitung Monacor DMR1904LCD (Seite 33 von 36) (Englisch)

632504

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Chapter 9

Appendix

9.1 Recording Alarm setting

Please refer the below matrix: “⊥” stand for “only alarm but no recording”; “AMR” stand for “alarm

recording”; “NLR” stand for “normal recording”; and “NOR” stand for “ no recording”. Once alarm is triggered,

alarm icon will occur, and when many alarms are triggered, alarm remarks will occur on the screen.

Recording alarm setting

Alarm icon

Recording Mode

Recording after

power on

Timing recording

Manuel Recording

AMR NLR NOR

Alarm

mode

MD alarm

AMR AMR NLR ⊥ NLR

I/O triggered alarm

AMR AMR NLR ⊥ NLR

HDD loss, HDD space full ⊥ ⊥ ⊥ ⊥ ⊥

Video Loss Video Loss ⊥ ⊥ ⊥ ⊥ ⊥

List 9-2

When DVR is in recording mode, [

] icon or [ ] icon will appear on the screen. But when there are [ ] icon

and [

] icons on the screen it indicates a motion alarm was triggered. When [ ] icon appears on the screen, that

mean a hard drive alarm has occurred.

9.2 Troubleshooting

Q: What can I do if the system does not detect the HDD?

A: Check the data and power cables and make sure they are securely connected.

. Q: We have changed the password but do not remember the new password, how can we access the system?

A: If you forget system password, enter 0800808 into the password field to reset the password

3. Q: We are not getting any video signal on the DVR, what is wrong?

A: Check to make sure the cables are securely connected to the BNC ports on the DVR. You can also try another

cable to make sure there is not a problem with the cable. Make sure you have selected the correct video format for

your country (NTSC or PAL), is the USA we use NTSC.

Q: Can the DVR have problems if it gets too hot, how can I prevent this?

A: The DVR has a fan to help it dissipate heat while it is working. Please place the DVR in a place where there

is good air circulation and away from high temperatures to increase stability and life of the DVR.

Q: My remote control does not work when the DVR is in Live mode but the front panel buttons are working,

what is wrong?

A: Make sure nothing is blocking the LED on the remote, or the receiver on the DVR, if both are ok, check the

batteries.

Q: Can I use the hard drive from my PC in the DVR?

A: You can if the hard drive is the same type and the size is supported by the DVR. If you install it in the DVR it

will be formatted for use in the DVR and the PC will not be able to read it.

Q: Do I have to stop recording to playback files on the DVR?

A: No you do not have to stop recording, the DVR will support both functions at the same time.

Q: Can I erase files from the hard drive of the DVR?

A: You can not erase individual files, you would need to format the hard drive which will erase all of the files

9.Q: Why can’t I log-in to the Net-viewer program?

A: Please verify that the Net mode is correct, The cable to the RJ-45 port is well connected to the DVR and the

router, and that you are using the correct password.

. Q: We have attached a PTZ camera but can not control it, what is wrong?

A: Verify that the Protocol, baud rate, address, and other settings on the PTZ camera match the settings you have

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Monacor DMR1904LCD Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Monacor DMR1904LCD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info