Bedienungsanleitung Monacor DMR524 (Seite 35 von 60) (Englisch)

632632

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

LICENSED SOFTWARE AP

-31-

7. LICENSED SOFTWARE AP

7.1 Installation

1) Install the software:

Place the attached licensed software AP disk into the CD-ROM drive, and install the application programs into your

PC (Including AP and JAVA programs). After setup, users will see an AP shortcut icon on the desktop.

For the latest software AP, please check with your distributor, or download from the Internet. Please refer to section

“(2) AP and JAVA Software Upgrade” at page 29, or section “7.6 Operation via IE Browser” at page 48.

2) Local Network Connection:

Connect your DVR to PC via RJ45 network line. The default DVR IP is “192.168.1.10”, and default user name and

password are both “admin”. Users should set PC’s IP address as “192.168.1.XXX ” (1~255, except 10) in order to make

the PC and DVR under the same domain.

Double click " " to enter the login page. Key in default IP address (192.168.1.10), username (admin), password

(admin) and port (80) in the login page.

3) Network Setting

After connecting to the DVR with local LAN, you can modify the network settings in the DVR or in “SYSTEM

CONFIG” menu of the software AP.

For the static IP network type, please refer to section “3.6.1 STATIC IP” at page 9. For the dynamic IP network type

(PPPOE or DHCP), please refer to section “3.6.3 Dynamic IP － PPPOE” at page 10 and section “3.6.4 Dynamic IP －

DHCP” at page 11. For detailed DDNS apply, please refer to section “3.6.2 DDNS Apply” at page 10.

4) User Name and Password Setting:

For detailed user name and password setting, please refer to section “3.7.2 Remote Login Password and User

Name Setting” at page 12.

7.2 Login Panel

After setting up the network information, remote login user name and password, double click " " on the

desktop to enter the software AP login page, and key in "Username", "Password", "IP” (IP address for static IP or host

name for dynamic IP) as well as "Port". Then, click the green button to connect to the DVR.

The AP login icon explanations are as following:

ICON EXPLANATION ICON EXPLANATION

Address Book

Press this button to add a

new IP address into the IP

address book, or choose any

preset IP address to access

the software AP software.

Copy

Press this button to copy all

the software installation files,

so users can keep all the

settings of the video web

server for next software

installation on other PCs.

Search available DVR IP

addresses in the local area

network and modify the

network setting of the DVR.

Upgrade Firmware

Press this button to upgrade

DVR firmware or OSD

language files. The provided

firmware and OSD files

should be saved at PC first.

Player

Press this button to access

and play the latest recorded

file that are saved in your PC.

Note: The version of the licensed software AP will be shown on the login page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Monacor DMR524 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Monacor DMR524

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info