Pouring water
Pouring water
It does not need to remove water container from main unit when pouring water. You can
pouring the water directly to the water inlet on top of the product.
a Make sure that the product is installed
in a safe location and plug the power
cord before pouring water.
b Pour the water to the water inlet using a
proper container.
‐ If the water container is fully lled, indicator
lights on with beep sound.
‐ Fill the container with water slowly,
adjusting amount of the water.
Caution
• Stop supplying water if the full water indicator lights on or beep sound.
• Do not pour the water while operating. It may cause malfunction and the water can be splashed
around the unit.
• Do not ll the water container with hot or warm water. It may cause malfunction.
• Do not put any disinfection cleaner, soap, fragrances, chemicals and so on to the water
container. It can be harmful to the human body.
Notice
• Pour the appropriate amount of water. If the water exceeded the maximum capacity, the unit
does not work.
• Using the tap water is more sanitary. The tap water has the eect of inhibiting bacterial growth.
• If using the water other than tap water such as groundwater, puried water, it may cause
bacterial growth and low mist.
• If you smell chlorine in the tap water, it is recommended to leave the water for a day and then
use it.
• You may see white stain in the water container depending on the water used. Clean the water
container frequently.
• Carrying the water container lled with water may occur product damage or injury by dropping.
Pour the water after assemble the water container in the main unit.
• When the water container is broken, be careful of injury due to pieces and sharp edges of
broken water container.
