Bedienungsanleitung Moneual MI-120 (Seite 7 von 29) (Deutsch, Englisch, Französisch)

674802

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

- corded mode: the iron can be used with the power unit.

Note: If you wish to apply numerous shots of the steam, use the iron in the corded mode.

DRY IRONING

 Connect the iron to a suitable mains supply outlet.

 Ensure that the steam control knob is in position “ ”.

 Select the setting on the temperature regulator.

 When the indicator light goes off, the required temperature is reached. The iron is ready for use.

 To turn off the iron, turn the temperature regulator counter-clockwise to position “MIN”, set the iron

upright, and pull out the power plug.

STEAM IRON

Fill the water tank as described before initial usage.

Steam ironing can be used in the temperature ranges ●, ●●, ●●● MAX. For the reliable functioning of the steam

ironing, the water tank must be at least ¼ filled.

Spraying function: Press the spray button to moisten a spot to be ironed. Water will came out of the spray nozzle.

Steam Function: Turn the steam control knob to the required position, steam starts coming out from the holes

in the soleplate.

Burst of steam: Turn the temperature regulator to the position “MAX”. The indicator light will go off when the

required temperature is reached, then press the burst of steam button. This function provides an extra amount

of steam to remove stubborn wrinkles.

The iron surface must always be kept in an upright position.

To turn off, turn the temperature regulator counter-clockwise to “MIN” and pull out the power plug.

Turn the appliance upside down and carefully pour the remaining water out of the water tank. Carefully shake

the appliance.

Press the spray button to allow possible remaining water to come out more easily.

Anti-drip: This iron is equipped with a drip stop function: the iron automatically stops steaming when the

temperature is too low to prevent water from dripping out of the soleplate.

DESCALING

The appliance cannot be descaled using vinegar or any other liquid descaling agent. The steam iron has a self-

clean function:

Self-clean function

You can use the self-clean function to remove scale and impurities.

Use the self-clean function once every two weeks if the water in your area is very hard. The self-clean function

should be used more frequently.

 Set the 3-position switch to position (for corded iron). Make sure the appliance is unplugged.

 Take the iron from the stand.

 Set the steam control knob to position “ ”.

 Fill the water tank to maximum level.

 Select the maximum ironing temperature.

 Put the plug in the wall socket.

 Unplug the iron when the temperature indicator light goes off.

 Hold the iron over the sink, press and hold the self-clean button and gently shake the iron to and fro. (Steam

and boiling water will come out of the soleplate. Impurities and flakes (if any) will be flushed out).

 Release the self-clean button as soon as all water in the tank has been used up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Moneual MI-120 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info