44
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET WHEN PERFORMING
CLEANING
Drain the remaining water into the tank and clean the tank after every use.
How to decalcify the Water Tank interior:
To clean calcium deposits that build up inside the water tank , add one or two tablespoons of white
vinegar to a full water tank, close it and then shake the content. DO NOT TURN THE STEAMER ON.
Cleaning procedure to remove lime scale:
If your steam mop begins to produce steam more slowly than usual or stops producing steam , you
may need to remove lime scale. Lime scale can develop over time on the metal parts and greatly
affect mop performance.
It is necessary to remove lime scale on regular basis every 25-50 times you use a full tank of water
or at least once a month, especially in areas with hard water.
The frequency of lime scale removal depends upon the hardness of you tap water and how often
you use the steam mop.
By using cleaning solution:
1 Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2 Secure and position the unit to ensure steam released is aimed away from the floor or
surrounding objects and surface. Plug the unit and turn it ON by pressing the power switch
and allow the unit to produce. The steam unit will use the vinegar/water.
3 Repeat the above procedure as many times as necessary unit a normal steam flow rate is
achieved.
4 Fill the water tank with fresh water and rinse out.
5 Fill the water tank with fresh water, attach to the unit and release steam through the
system unit until the water tank is empty.
Cleaning microfiber pads:
1 Machine washable on "warm" setting. Always use a mild detergent.
2 For best care results ,lay flat to dry.
3 IMPORTANT：Allow the steamer to fully cool down before performing any maintenance or
troubleshooting checks.
4 IMPORTANT：Never use bleach or fabric softener when washing the microfiber cleaning pad.
