Bedienungsanleitung Morphy Richards 333201 - Speed Steam (Seite 7 von 12) (Englisch)

793831

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Turn the temperature dial (8) to suit the garment

(see ‘Temperature guide’ on page 5). The

temperature indicator light (5) illuminates until the

temperature is reached. Begin ironing when the

temperature indicator light goes out.

It is advised to begin with ‘cool’ fabrics (see

above) and work up to higher settings. An iron

heats up quicker than it cools down so you’ll save

time and electricity.

If you turn the temperature dial (8) down from a

hot setting to a cooler setting, wait until the

temperature indicator light (5) goes out (indicating

the correct temperature has been reached) before

you continue ironing.

Unlock the iron (11)from its storage position on

top of the base unit(14)by sliding the iron-to-

base lock(9)to the position marked with an

unlocked padlock icon - the iron can then be

lifted off the base unit.

WARNING:

The soleplate will be hot.

During use, the iron (11)may be rested on the

iron rest plate(13).

Using the Steam Generator (continued)

Ironing with steam

Press the steam level select button (18) to select

your desired steam level. The selected steam level

will be displayed by illumination of the relevant

steam level indicator light (17). The steam level

indicator light will stop flashing and illuminate

constantly when the selected steam level is reached.

To operate the steam, press and hold the steam

trigger (4) to release steam. There will be a slight

delay whilst the steam is drawn from the base and

along the steam cord to the irons soleplate (6).

NOTE: Residual steam - as the steam has a long

distance to travel along the steam cord it is likely

that there will still be some steam coming from the

soleplate for a short while after you have released

the trigger. This is normal and will eventually stop

after several seconds. If it doesn't you may have

accidentally activated the steam boost in which case

press the steam trigger again to switch off the steam

boost.

WARNING: The steam supply cord

(22)

will get hot

during use.

Steam boost

The steam boost function is ideal for relaxing the

fibres of tougher fabrics (like jeans and linen) and

getting rid of those stubborn, hard to reach

creases.

To produce a powerful shot of steam during

ironing, simply press the steam trigger (4) twice

in quick succession. To turn this off, press the

steam trigger again.

To conserve water in the tank, we recommend

you switch off the steam boost when the iron is

not in use.

NOTE: The product may occasionally produce a

pumping sound during steam ironing. This is

normal and is caused by water being pumped

from the water tank to the steam generator. If

the pumping sound suddenly becomes louder

or the steam diminishes, check and refill the

water tank if it has become empty.

RN333200 MUK Rev1.qxp_IB 11/04/2018 17:16 Page 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Morphy Richards 333201 - Speed Steam Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info