Bedienungsanleitung Morso 4143 (Seite 23 von 36) (Englisch, Dänisch)

744391

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

1.6 Connecting the ue pipe

The ue collar can be rotated and be used for ø150 (inside and outside the ue collar) and

ø120 connections.

Mounting the ue collar pointing upwards

From the factory, the stove is prepared for installation with the ue collar provided (1) point-

ing upwards. The ball stop, which prevents the chimney sweep from damaging the stove’s

bae plates while sweeping, is the 128 mm long rod that is provided in the stove. The ue

collar stop bar is tted when installing the chimney.

Mounting the ue collar to the rear

Lift the top panel and convection back panel from the stove.

Remove the smoke outlet from the top outlet. The smoke outlet must not be used when

connecting the ue pipe to the rear.

Remove the round plate which is xed with 2 screws at the rear of the stove and x it in-

stead on the top outlet.

With a hammer use light, rm taps to knock out the iron piece on the convection back panel

from the small “bridges” holding the piece in place.

When connecting the flue pipe to the rear, use the

other cast smoke outlet supplied with 40 mm inser-

tion depth.

The ball stop must not be used when installing the ue

collar to the rear.

Lift the top panel and convection back panel back into

place.

A round section is provided which can be placed in the

top panel and cover for the blocked o smoke outlet.

The location of the baes

The baes (2) and (3), which are made from vermicu-

lite, are mounted on delivery.

Make sure that the baes are correctly assembled be-

fore lighting the stove (please see the sketch).

Fresh air connection, if required

Downwards:

The stove is tted ex works with a branch piece under

the stove for fresh air connection, if required.

Rearwards:

Lift the top plate and convection back panel o the stove and

remove the branch piece under the stove. Remove the round

plate tted with two screws at the bottom at the back of the

stove and, instead, attach it where the branch piece was pre-

viously tted under the stove. Re-t the branch pipe where

the round plate was previously tted at the back of the stove.

The iron piece at the bottom of the convection back panel is

knocked out with light, rm taps with a hammer next to the

small ”bridges” holding the piece in place. Lift the convection

back panel and top plate back into place.

B-B

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:5

Snit til vejledning

Morsø S10-40

RSV

25.08.2010

Date of print: 24-11-2010

U:\udv\Tegninger\Pladejernsovne 2010\S10-40\S10-40.SLDASM

S10-06 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Morso 4143 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Morso 4143

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info