Bedienungsanleitung Morso 6840 (Seite 12 von 21) (Englisch, Dänisch)

744343

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

DK ENG

1.0 Installing your Morsø stove

1.1 Unpacking the stove

The Morsø 6800 stoves weigh between 110 and 125 kg. In order to avoid damage when un-

packing and assembling the stove, we recommend that this job be undertaken by 2 people.

Remove the top cover, which is lying loose, before lifting the combustion chamber o the

wooden pallet. Place the stove carefully in position, centrally on the base plate.

1.2 Installing the stove

The stove comes with a smoke outlet included. The ball blocking device that is to stop the

chimney sweep’s ball during sweeping is also supplied with the stove and is installed at the

same time as the smoke outlet.

National and local regulations regarding the installation of wood-burning stoves must be ob-

served, as must local regulations regarding chimney connections and chimney installation. You

may want to ask your chimney sweep for advice. However, you, your technical adviser or work-

man are responsible for complying with the applicable national and local regulations.

1.3 Chimney sweep

As stated, it may be wise to consult your local chimney sweep before installing the stove. In

any event, the chimney sweep must be notied once the wood-burning stove has been in-

stalled. The chimney sweep will inspect the installation and schedule sweeping intervals with

you. If your chimney has not been used for some time, it should be inspected for cracks, bird

nests, etc., before it is used.

1.4 Location of the stove/distance requirements

Distance requirements apply only if the stove is placed near ammable materials. Your new

stove can be positioned as specied on the certicate of approval on the back of the stove

if the walls are made of ammable material.

Minimum distances from ammable material:

Type of stove Behind the stove (A)

To the sides of the

stove (B)

45°corner (C)

Morsø 6800

uninsulated ue

150 mm 400 mm 100 mm

Morsø 6800

insulated ue

50 mm 300 mm 100 mm

45°

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:50

Date of print: 07-10-2016

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Revisions

Rev.

Sign.:

Title:

Drawing no.:

1:50

Date of print: 07-10-2016

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight kg:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

We recommend that the stove be installed at least 10-15 cm from masonry in order to allow

heat to circulate and to facilitate the cleaning of the inside and outside of the stove. A layer

of wallpaper on a brick wall is normally regarded as non-ammable material.

The oor

If the stove is installed on a ammable oor, national and local regulations must be observed

with regard to the size of the non-ammable underlying surface that must cover the oor be-

neath the stove.

The underlying surface must naturally be able to bear the weight of the stove and, if ap-

plicable, the steel chimney.

Distance to furniture

We recommend that the stove be installed 900 mm from furniture, but consideration should

also be given to whether furniture, etc., will dry out as a result of its proximity to the stove.

The distance to ammable material in front of the stove is 900 mm.

A wood-burning stove gets hot when it is red. Caution must therefore be observed, par-

ticularly with regard to children touching the stove.

1.5 The chimney

If local regulations permit, the stove may be connected to a chimney already serving anoth-

er replace (such as an oil-burning stove or another wood-burning stove). Attention should

be paid to any requirements concerning the location of ue pipes if two or more replaces

are connected to the same chimney.

The wood-burning stove must never be connected to a chimney to which a gas-burn-

ing stove is already connected.

An ecient, modern stove places great demands on the chimney, so have a chimney sweep

check the condition of your chimney.

The aperture of the chimney must comply with national and local regulations. In general,

the aperture area should measure at least 175 cm2 for wood-burning stoves.

An overly large chimney aperture will mean that too much energy will be required to heat

the chimney suciently to achieve an acceptable draught. If you have a brick chimney with

a large aperture, we recommend that you install an insulating chimney liner of the proper

diameter. This will increase the draught, and improve the fuel economy.

There are no requirements with respect to specic chimney heights, but a chimney must be tall

enough to provide a good draught, and to ensure that the smoke does not cause any problems.

As a general rule, there will be a satisfactory draught if the chimney extends 4 metres above the

stove and at least 100 cm above the spine of the roof. If the chimney is located along the side of

the house, the top of the chimney should never be lower than the spine of the roof or the high-

est point on the roof. Please note that there are often national and local regulations regulating

the location of chimneys in houses with thatched roofs. Please see section 1.9 Draught.

The chimney and the ue pipe must be tted with cleaning doors, which must be at least

the same size as the chimney’s aperture area.

The chimney must be accessible for external inspection, and it must be possible to access

the cleaning doors and the chimney if it is to be cleaned from the top (e.g. steel chimneys).

Morso 6840 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Morso 6840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info