Bedienungsanleitung Morso Forno Spin (Seite 6 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

812186

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

LÆS FØRST DETTE

Test for gaslækage

Det er vigtigt, at du tester apparatet for lækage, inden du tager det i brug første gang, og hver gang gasa-

sken skiftes, og en ny tilsluttes apparatet.

Sådan udføres lækagetesten

• Sørg for, at alle kontrolknapper står i OFF-position.

• Lav en blanding af vand og opvaskemiddel/sæbe i en lille beholder.

• Denne opløsning blandes godt (omtrent samme koncentration som sæbevand)

• Gasaskens regulator drejes til åben stilling.

• Brug en børste eller sprayaske til at påføre sæbeopløsningen på gasslangen og hver af slangens forbin-

delser, herunder:

- gastilslutningen ved indgangen til apparatet

- alle gasslangens forbindelser

- gastilslutningen ved gasasken.

• Hvis der opstår bobler, er der en gaslækage.

• Hvis lækagen er ved en forbindelse, strammes og tætnes.

• Opstår lækagen andre steder, eller hvis du ikke kan løse problemet ved at stramme forbindelsen, MÅ DU

IKKE FORTSÆTTE

• Udskift gasslange og regulator.

• Ny gasslange og regulator kan købes hos din lokale forhandler.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

Morso Forno Spin Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info