812186
18
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
18
READ ME FIRST
Gas leak testing
It is important that you leak test the appliance before rst use and every time the gas cylinder is relled and
reconnected to the appliance.
To complete leak test
Make sure all the control knobs are OFF.
In a small container, mix up a solution of water and detergent/soap.
Mix the solution well (about the same concentrate as soapy water).
Turn the regulator on the gas bottle to the open position.
Using a brush or spray bottle apply the soap solution to the gas line and each Connection in the gas line
including:
- the gas connection at the inlet of the appliance
- all gas hose connections
- the gas connection at the gas cylinder
If bubbles appear, there is a gas leak.
If the leak is at the connection, re-tighten and re-seal.
If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
Replace gas hose and regulator.
Replacement hose and regulators can be purchased from your local boiler retail specialist.
READ ME FIRST
Gas leak testing
It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and
reconnected to the BBQ.
To Complete Leak Test
Make sure all the control knobs are OFF.
In a small container, mix up a solution of water and detergent/soap.
Mix the solution well (about the same concentrate as washing up water).
Turn the cylinder ON by rotating the knob to open position.
Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
If bubbles appear, there is a gas leak.
If the leak is at the connection, re-tighten and re-seal.
If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
Replace gas hose and regulator.
Replace hose and regulators can be purchased from your local BBQ retail specialist.
READ ME FIRST
Gas leak testing
It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and
reconnected to the BBQ.
To Complete Leak Test
Make sure all the control knobs are OFF.
In a small container, mix up a solution of water and detergent/soap.
Mix the solution well (about the same concentrate as washing up water).
Turn the cylinder ON by rotating the knob to open position.
Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
If bubbles appear, there is a gas leak.
If the leak is at the connection, re-tighten and re-seal.
If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
Replace gas hose and regulator.
Replace hose and regulators can be purchased from your local BBQ retail specialist.
READ ME FIRST
Gas leak testing
It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and
reconnected to the BBQ.
To Complete Leak Test
Make sure all the control knobs are OFF.
In a small container, mix up a solution of water and detergent/soap.
Mix the solution well (about the same concentrate as washing up water).
Turn the cylinder ON by rotating the knob to open position.
Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
If bubbles appear, there is a gas leak.
If the leak is at the connection, re-tighten and re-seal.
If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
Replace gas hose and regulator.
Replace hose and regulators can be purchased from your local BBQ retail specialist.
READ ME FIRST
Gas leak testing
It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and
reconnected to the BBQ.
To Complete Leak Test
Make sure all the control knobs are OFF.
In a small container, mix up a solution of water and detergent/soap.
Mix the solution well (about the same concentrate as washing up water).
Turn the cylinder ON by rotating the knob to open position.
Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:
- the gas connection at the inlet of the BBQ
- all gas hose connections
- the gas connection at the gas cylinder
If bubbles appear, there is a gas leak.
If the leak is at the connection, re-tighten and re-seal.
If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.
Replace gas hose and regulator.
Replace hose and regulators can be purchased from your local BBQ retail specialist.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Morso Forno Spin wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info