Bedienungsanleitung Morso Forno Spin (Seite 30 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

812186

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

WICHTIGE HINWEISE

Gasdichtheitsprüfung

Führen Sie nach jedem Nachfüllen und Anschließen der Gasasche eine Gasdichtheitsprüfung durch.

So geht die Gasdichtheitsprüfung

• Achten Sie darauf, dass alle Knöpfe aus AUS stehen.

• Mischen Sie in einem kleinen Behälter eine Lösung aus Wasser und Reinigungsmittel/Seife.

• Durchmischen Sie die Lösung gut (etwas ein Konzentrat wie bei Seifenwasser).

• Drehen Sie den Regler an der Gasasche auf.

• Geben Sie mit einer Bürste oder Sprühasche Seifenlösung auf die Gasleitung und alle Verbindungen an

der Gasleitung, darunter:

- den Gasanschluss am Einlauf zum Gerät

- alle Gasschlauchanschlüsse

- den Gasanschluss an der Gasasche

• Wenn sich Bläschen bilden, gibt es ein Gasleck.

• Wenn das Leck sich am Anschluss bendet, ziehen Sie diesen fest und erneuern Sie die Dichtung.

• Wenn sich das Leck anderswo bendet oder Sie das Leck nicht durch Festziehen des Anschlusses be-

heben können, MACHEN SIE NICHT WEITER.

• Ersetzen Sie den Gasschlauch und Regler.

• Ersatzschläuche und -regler sind im Fachhandel erhältlich.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

Morso Forno Spin Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info