Bedienungsanleitung Morso Forno Spin (Seite 78 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

812186

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

À LIRE EN PREMIER

Test de fuite de gaz

Il est important de tester l'étanchéité de l'appareil avant la première utilisation et à chaque fois que la bout-

eille de gaz est rechargée et reconnectée à l'appareil.

Pour terminer le test d'étanchéité

• Assurez-vous que tous les boutons de commande soient en position OFF.

• Dans un petit récipient, mélangez une solution d'eau et de détergent/savon.

• Mélangez bien la solution (à peu près le même concentré que l'eau savonneuse).

• Réglez le régulateur de la bouteille de gaz en position ouverte.

• À l'aide d'une brosse ou d'un acon pulvérisateur, appliquez la solution savonneuse sur la conduite de gaz

et sur chaque connexion dans la conduite de gaz, y compris :

- le raccord de gaz à l'entrée de l'appareil

- tous les raccords de tuyau de gaz

- la connexion de gaz au niveau de la bouteille de gaz

• Si des bulles apparaissent, c’est que vous êtes en présence d'une fuite de gaz.

• Si la fuite est au niveau de la connexion, resserrez et refermez hermétiquement.

• Si la fuite est ailleurs ou si vous ne pouvez pas résoudre la fuite en reserrant la connexion NE CONTINUEZ PAS.

• Remplacez le tuyau à gaz et le régulateur.

• Le tuyau de remplacement et les régulateurs peuvent être achetés auprès de votre spécialiste local de la

vente au détail de chaudières.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

Morso Forno Spin Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info