Bedienungsanleitung Morso Forno Spin (Seite 90 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

812186

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ANTES DE EMPEZAR

Comprobación de escapes

Es importante que compruebe que no haya escapes de gas antes del primer uso y cada vez que rellene la

bombona o la conecte de nuevo al aparato.

Para comprobar que no haya escapes

• Asegúrese de que todos los mandos de control están apagados («OFF»).

• Prepare en un recipiente una solución de agua con detergente o jabón.

• Mezcle bien esta solución (con un concentrado similar al del agua de fregar).

• Gire el regulador de la bombona hasta la posición de abierto.

• Con un cepillo o un pulverizador, aplique la solución jabonosa a toda la línea del gas y a sus conexiones,

que incluyen:

- la conexión de gas a la entrada del aparato

- todas las conexiones del tubo exible

- la conexión de gas de la bombona

• Si se forman burbujas, hay un escape de gas.

• Si el escape es en una de las conexiones, vuelva a apretarla y a sellarla.

• Si el escape es en otra parte o no puede solventarlo apretando la conexión, NO CONTINÚE.

• Cambie el tubo exible y el regulador.

• Puede obtener tubos exibles y reguladores de repuesto en tiendas especializadas en calefacción de su

zona.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

READ ME FIRST

Gas leak testing

It is important that you leak test the BBQ before rst use and every time the gas cylinder is relled and

reconnected to the BBQ.

To Complete Leak Test

• Make sure all the control knobs are OFF.

• In a small container, mix up a solution of water and detergent/soap.

• Mix the solution well (about the same concentrate as washing up water).

• Turn the cylinder ON by rotating the knob to open position.

• Using a brush or spay bottle apply the soap solution to the gas line and each join in the gas line including:

- the gas connection at the inlet of the BBQ

- all gas hose connections

- the gas connection at the gas cylinder

• If bubbles appear, there is a gas leak.

• If the leak is at the connection, re-tighten and re-seal.

• If the leak is anywhere else or you cannot resolve the leak by tightening the connection DO NOT PROCEED.

• Replace gas hose and regulator.

• Replace hose and regulators can be purchased from your local BBQ retail specialist.

Morso Forno Spin Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info