25
Sprog
1. General
1.1. Rules to be followed
(Basic requirements)
o Installation standard DIN 18895
o Installation standard DIN 18896
o DIN EN 13384 part 1 and part 2
o DIN 18160-1
o National building regulations
o Regulations for replaces
o Professional rules for the stove and air source heating trade
It is important to choose the right size inset, taking into account the situation regarding
heat requirements, the conditions and needs of the operator, to ensure the good and
economic operation of the inset. Therefore, it can be a good idea to calculate the heat
load (heat requirement).
Please read the tting instructions carefully before you start. All liability and guarantee
claims are invalid in the event of damage caused by not complying with these tting in-
structions.
Reference is also made to the other instructions in this manual.
Installation of the replace inset and connection to the chimney must be agreed with the
local chimney sweep.
1.2. Pre-tting checks
• Check immediately that none of the delivered items are damaged and that the order is
complete.
• Before tting the equipment, check that all moving parts work. In principle, any faults
should be reported before installation.
• Remember to keep hold of the enclosed user manual and hand it over to the customer
personally, when giving a stoking demonstration for example.
