Bedienungsanleitung Motion Computing C5t (Seite 74 von 87) (Englisch)

493810

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

Chapter 4 Troubleshooting and FAQs Troubleshooting 68

Battery issues

The battery doesn’t last very long (less than four hours)

• Hot or cold conditions can adversely affect the battery charge. Use AC power if you’re

operating the tablet in these conditions.

• Accessory devices such as a DVD player and applications that make heavy use of the

hard drive can drain the battery more quickly. Remove the accessory devices or use AC

power if possible.

• Condition the battery once a month by using the tablet on battery power and allowing

the battery charge to drop below 20% before connecting the battery to AC power.

• The battery may be weakening. Use a different battery if possible.

• For other battery optimizing tips, see Battery and power management tips on page 45.

Display issues

When I connect to an external monitor, the cursor appears on the external monitor

and not on my tablet

• This is a known Windows® 7 issue. If you’ve connected multiple touch-enabled displays,

Windows® may not assign touch to the correct display. To fix this issue, run Setup to

assign touch to the appropriate display. Make sure a keyboard is attached to your tablet

and then open Motion Dashboard. Tap Pen & Tablet, then tap Tablet PC Settings. Tap

the Display tab, then tap Setup next to “Configure your pen and touch displays.” Tap

Touch Input, then press the Enter key until you see the instructions appear on the

display that you want to use for touch input. Follow the on-screen instructions for

setting up touch on this display.

When I disconnect an external monitor, the desktop area is larger than the Tablet PC

display

• The tablet may have expanded the desktop beyond the display area of the Tablet PC

display when it was connected to the external monitor. Use Motion Dashboard to reset

the Tablet PC to the display setting for stand-alone tablets. Open Motion Dashboard, tap

Display. Then, from the Display Scheme drop-down list, select Tablet Only.

• The display resolution might not match the native resolution of the LCD. You can use

other display resolutions, but you will get the best display quality when the display

resolution matches the native resolution of the LCD. Use Windows® Display Properties to

set the display resolution to 1024 × 768 pixels. For more information, open Windows®

Help and Support and search for “change resolution”.

The display goes black while the Tablet PC is still turned on

• The Tablet PC might have turned off the display to save power. To restore the display, tap

the screen with the pen (or touch the screen if your tablet has a touchscreen display).

• The tablet might have gone into Sleep mode. Press and hold the power button for

about one second.

• The tablet might have gone into low-battery Hibernation mode. In Hibernation mode,

the power status light is off. Plug the tablet into AC power, then press and hold the

power button for about one second.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Motion Computing C5t Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info