Bedienungsanleitung Motion Computing CL910 - FWS-001 (Seite 69 von 79) (Englisch)

493801

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

Chapter 4 Troubleshooting and FAQs Troubleshooting 64

Bluetooth wireless tips

Motion Computing and its Bluetooth partners have worked to ensure a positive experience

with this technology and to ensure Bluetooth interoperability. In doing so, we have found

the following issues:

• Interference—If you are running Bluetooth and Wi-Fi at the same time, interference can

affect the Bluetooth performance. This is most noticeable if:

– You try to transfer large amounts of data, such as file transfers

– Several Bluetooth devices are operating in an office simultaneously

• Speech Recognition—Bluetooth audio has not been fully developed for speech

recognition. Therefore, for speech recognition, we recommend that you don’t use a

Bluetooth wireless headset. A better solution is to use Motion Speak Anywhere, which

can record clear audio, dictate notes, and use voice commands without a microphone

headset.

• Disconnection—Some Bluetooth devices will disconnect when they go into power-

saving mode. Most devices will automatically reconnect when they become active again.

• Incompatible drivers—If you attempt to install other wireless headset or other audio

drivers (such as Bluetooth or USB) over the tablet PC audio drivers, a malfunction of the

tablet PC audio system may occur because the drivers may not be compatible.

• Interoperability—If you are having problems with interoperability of Bluetooth

devices, contact the manufacturer of your Bluetooth device and check its compatibility

with the Bluetooth software installed on your tablet PC.

• Security—Bluetooth devices use a passkey to create a secure connection between the

tablet PC and the Bluetooth device. Although the passkey exchange helps to secure your

data, Bluetooth wireless technology should not be considered completely secure.

Mobile broadband with GPS issues

I can’t connect to a mobile broadband network

• Mobile broadband is only available if you purchased your CL910 with the optional

Mobile Broadband with GPS module.

• A mobile broadband network requires you to have a data plan from a cellular network

provider.

• You may need a SIM card from your network provider. If the network is on a UMTS

network (such as AT&T®, Orange® or T-Mobile®), your network carrier must provide you

with a SIM card and you insert the SIM card in the slot on the left side of the tablet. The

SIM card contains your account information.

• Mobile Broadband with GPS must be enabled from the Motion Dashboard. Open Motion

Dashboard, tap Wireless, and tap the checkbox next to Enable Mobile Broadband with

GPS.

• Motion Connection Manager must be running. The Motion Connection Manager icon

appears in the Windows® notification area when it’s running. From the Windows® Start

menu, select All Programs > Motion Computing > MotionCM.

• Mobile broadband must be set up through the Motion Connection Manager. From the

Windows® Start menu, select All Programs > Motion Computing > MotionCM. Tap the

Help icon and select the help topic, “Setting up mobile broadband.” Follow the

instructions to set up a network profile and connect to a mobile broadband network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Motion Computing CL910 - FWS-001 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info