Bedienungsanleitung Motorola D1112 (Seite 32 von 43) (Englisch)

458253

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

32 Text messaging

Insert Emoticon

Press

Select

. The Emoticon table is displayed. Press u

d to highlight the Emoticon you want then press

Insert

Insert Template Press

Select

. The list of templates is displayed. Press u

d to highlight the Template you want then press

Insert

When sending a message, the display shows

Sending Message

then

Message Sent

WRITING TIPS

Press

Clear

to delete incorrect characters.

Use

u or d to move the cursor through the text, if you want to insert/

delete text.

UPPER & LOWER CASE

Press

# to switch between upper case and lower case letters.

Maximum number of characters in a text message is 160. The display

shows a character countdown from 160 down to 0 (Unless message size

is set to 612 characters).

If the text is unsuccessful, the message

Message Sending Failed!

will be

displayed.

In order to send and receive text messages you must not withhold your

number.

Standard text entry

With standard text entry you can enter a word by pressing each letter

button a number of times to display the character you want on the screen.

For example, to write the word “Hello”, press

4 twice, 3 twice, 5

three times,

5 three times and 6 three times.

Receiving and reading text messages

Your D1111 can store up to a total of 50 short messages across all

handset Outboxes, Drafts boxes and Inboxes.

When you receive a new text message, the icon is displayed along

with

You have X new messages

DO YOU HAVE TWO TEXT PHONE BASES CONNECTED TO THE

SAME PHONE LINE?

If you have two text phone base stations plugged into one line, you are

likely to experience problems receiving text messages. Normally, only

one SMS enabled base unit (DECT or cordless) can be plugged into any

line.

If you do want to use two base units and still receive written text you must

delete receive service centre number from one of the base stations. To

do this on your D1111, see page 34.

This will allow you to send text via either base station but texts will only

be received on the product with the active receive centre number.

If the base unit with the active receive centre number is a DECT product

then all handsets registered to will be able to receive text messages.

MEMORY FULL ALERT

If the text mailboxes are full when you attempt to write a new message

the display shows

Memory Full Delete Messages

. You must delete messages

before you can write and send a new one.

Read a new message

Received messages are stored in the Inbox.

The Inbox is opened and the list of messages displayed. If you press

Back

the message is stored in the Inbox for reading later.

In the Inbox scroll u (to more recent messages) or d (to earlier list of

messages) through the list of messages.

Highlight the message you want to read and press

Read

or press

Back

to return to Text messaging menu.

Press > to return to standby.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Motorola D1112 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Motorola D1112

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info