458253
36
Zoom out
Zoom in
Vorherige Seite
1/43
Nächste Seite
36 Using additional handsets
13. Using additional handsets
You can use up to five D1111 additional handsets with your D1111 base
to extend your phone system without needing to install extension sockets
for each new phone.
Your D1111 handset can also be registered to up to 3 other bases. You
can then select the base you would prefer to use.
If you have purchased a D1111 multiple pack any additional handsets
come pre-registered to the base.
If you have purchased an additional handset separately you must register
it to your D1111 base before it can be used.
Registering an additional handset
At the base:
1.
Press and hold p for 2 seconds until the base Power starts flashing.
The base will remain in registration mode for 90 seconds.
At the handset:
1.
If the handset is new and the display shows
Please Register
. Press
Menu
.
Scroll
u to
Registration
. Press
Select
.
Or
If the handset has already been registered to another base the
standby display is shown. Press
Menu
, scroll u or d to
Registration
and
press
Select
.
2.
Register Handset
is highlighted. Press
Select
.
3.
Bases are displayed. If necessary, scroll u or d to a new base you
wish to register your D1111 handset to and press
Select
.
4.
Enter the system PIN and press
OK
. (Default setting = 0000)
5.
The display shows
Searching Base X
(where X is the chosen base
number) then
Handset Registered
.
The handset is automatically assigned the next available handset
number.
If registration is not successful first time, please repeat the process again
in case the base registration period ran out of time.
If there are already 5 handsets registered to the base, the registration will fail.
You must de-register another handset before you can register the new one.
Select a base
If your D1111 handset is registered to more than one base, you can select
which base to use.
1.
Press
Menu
, scroll u or d to
Registration
and press
Select
.
2.
Scroll d to
Select Base
and press
Select
.
3.
All base numbers are displayed.
(In use)
is added to bases where the
handset was previously registered to. Scroll
u or d to the base you
want and press
Select
.
4.
Display shows
Searching Base…
. then the standby display for that base.
De-register a handset
Use one handset to de-register another. You cannot de-register the
handset you are using.
1.
Press
Menu
, scroll u or d to
Registration
and press
Select
.
2.
Scroll d to
De-register
and press
Select
.
3.
Enter the system PIN and press
OK
. (Default setting = 0000)
4.
Scroll u or d to the handset you want to de-register and press
Select
.
5.
Press
Yes
to confirm or
No
to cancel.
6.
Press
Back
to return to the previous menu level or > to return to
standby.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Motorola D1112 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Motorola D1112

Motorola D1112 Bedienungsanleitung - Deutsch - 31 seiten

Motorola D1112 Bedienungsanleitung - Holländisch - 47 seiten

Motorola D1112 Bedienungsanleitung - Französisch - 31 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info