504527
41
Zoom out
Zoom in
Vorherige Seite
1/81
Nächste Seite
DCT5100 Installation Manual
Section 4
Diagnostics
This section describes the diagnostics designed to confirm proper installation of the DCT5100.
They include checking error states, signal integrity, and provisions to identify the DCT5100 on
the network and verify communications with the headend. The diagnostic information is
displayed on the front-panel LEDs and the On-Screen Display (OSD).
For diagnostics provided in this section:
All indicators are in decimal notation unless otherwise noted.
All signal-level and quality indicators are based on a 1% to 100% scale, unless otherwise
noted.
All sample displays are illustrative; actual data may differ from the examples.
Accessing Diagnostics
You can run the base platform software or Thin Client software to access the DCT5100
diagnostics. The Heritage mode and the Enhanced mode are the two modes of entry for
accessing diagnostics. The Heritage mode uses the front-panel keys or IR remote and is
commonly used with the DCT 1000, DCT 1200, and DCT2000 models. The Enhanced mode uses
the front-panel keys and supports an on/off state-independent entry.
To access diagnostics using the Heritage and Enhanced modes:
1 Ensure the set-top is installed with the base platform or Thin Client software and that it is
connected to an ac outlet.
2 Press POWER and then within 2 seconds press SELECT for Heritage mode.
or
Simultaneously press both
CURSOR and CURSOR and hold both keys for three seconds for
Enhanced mode.
The DIAGNOSTICS main menu is displayed on the OSD and d01 is displayed on the
front-panel LED. The DCT5100 is now in diagnostic mode.
Use the following keys to navigate diagnostics menus:
Press
CHANNEL , CHANNEL , CURSOR , or CURSOR to select d01 through E.
Press
CURSOR , CURSOR , SELECT or ENTER to execute the selected diagnostic.
Select E from the main menu to exit.
Pressing
POWER also exits diagnostic mode.
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Motorola DCT5100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Motorola DCT5100

Motorola DCT5100 Bedienungsanleitung - Englisch - 58 seiten

Motorola DCT5100 Bedienungsanleitung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info