655727

Motorola IT.6.1TX Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
IMPORTANT
You cannot access the battery in
the handset. Do not attempt to
remove the battery, as you may
damage the phone. If you need
to replace the battery, contact
customer services.
• When the handset is fully
charged, plug the telephone
line cord into the socket
marked
on the underside
of the base and plug the other
end into the telephone wall
socket.
Step 4. Removing the battery
cover:
NOTE
Position the base at least 1
metre away from other electrical
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
A Paging key
Paging is a useful way of nding
lost handsets.
• Press p on the base.
All handsets ring.
• Press p again to cancel the
paging call or press any key on
the handset to stop the paging
call.
IMPORTANT
The base station must be plugged
into the mains power at all times.
Do not connect the telephone line
cord into the wall socket until the
handset is fully charged. Only use
the power and telephone cables
supplied with the product.
Step 2. Connect the charger
(Multi-pack only)
• Plug the mains power cable
into the socket marked
on
the underside of the charger
and plug the other end into the
mains power wall socket.
• Switch on the power supply.
Step 3. Charge the handset
• Place the handset on the base
and charge for at least 24
hours. When the handset is
fully charged, the
icon is
displayed.
If you have purchased a multi pack
you will also have the following
additional items:
Twin 1 x Additional handset
and charger.
1 x Mains power
adaptor for charger.
Trio 2 x Additional handset
and charger.
2 x Mains power
adaptor for charger.
Quad 3 x Additional handset
and charger.
3 x Mains power
adaptor for charger.
IMPORTANT
Only use the telephone line cord
supplied. This equipment is not
designed for making emergency
telephone calls when the power
fails. Alternative arrangements
should be made for access to
emergency services.
Warning! You cannot access the
battery in the handset.
BATTERY LOW WARNING
If you hear a warning beep every 2
minutes during a call, you will need
to recharge the handset before you
can use it again.
When charging,
icon will scroll
on the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged
battery should give up to 7 hours
talk time or up to 130 hours standby
time on a single charge.
1
Note that the new battery does not
reach the full capacity until it has
been put to normal use for several
days.
To keep the battery in the best
condition, leave the handset o the
base for a few hours at a time.
1
All talk and standby times are
approximate and depend on
features selected and usage
pattern.
Step 1. Set up the base
• Plug the mains power cable into
the socket marked
on the
underside of the base and plug
the other end into the mains
power wall socket.
• Switch on the power supply
Box Contents Box Contents Getting started
Display icons
Menu navigation
On when the line is in use.
Flashes when there is an incoming call.
Flashes when you have missed calls and new number(s) are in the
Calls list.
Handset ringer is o.
Steady when the handset is registered and within range of the base. Disappears
when the handset is out of range and flashes when searching for the base.
Flashes when you have new voicemail messages.
O when you have no voicemail messages.
Phonebook is open.
The alarm clock has been set.
Hands-free mode is activated.
Answering machine is on.
The approximate power levels of your battery are indicated as
below:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Battery is almost empty. The battery icon will flash and emit a warning
beep every 2 minutes during call.
Handset
Display
Call Log / Scroll Up /
Volume up
Open the Call log. Press
u
to enter Call Log menu and
then press
d to select
Call
List
or
Answ machine
menu.
Scroll up through lists and
settings.
Increase the earpiece
volume during a call.
Menu / OK
Enter the main menu.
Select the option displayed
on screen.
Conrm menu option – OK
is displayed on screen.
Redial
Open the redial list.
Talk / Hands-free key
Make or answer a call.
Activate and deactivate
hands-free during a call.
IMPORTANT
Hands-free activation can
suddenly increase the
volume in the earpiece to a
very high level. Make sure
the handset is not too close
to your ear.
Pulse to Tone Dialling / * /
Keypad lock
During a call, press and hold
to switch from pulse dialling
to tone dialling.
Dial a *.
In standby mode press and
hold to lock/unlock the
keypad.
Scroll right / Clear / Mute
/ Back
Scroll to the right.
Delete characters on screen
when entering names and
numbers.
Mute / unmute the
microphone during a call.
Go back to previous menu
level
is displayed on
the screen.
End call / Switch handset
on/o
End a call.
When in a menu, go back to
standby mode.
Press and hold to switch
handset o (when in
standby) or on.
Intercom
Press to make an internal call.
Phonebook / Scroll Down /
Volume down
Open the phonebook.
Scroll down through lists and
menus.
Decrease the earpiece volume.
Ringer o / Recall / # /
Change case
Press and hold to switch
handset ringer on or o.
Use recall (R) functions.
Dial a #.
When entering letters
/ editing, short press to
change the case from Abc to
abc or ABC mode.
Pulse / Space
When dialling or storing a
number, press and hold to
enter a pause (P).
Microphone
Digital Cordless Telephone with
Answering Machine
IT6TX Quick Start Guide
Models: IT.6.1TX, IT.6.2TX, IT.6.3TX and IT.6.4TX
This Quick Start Guide provides all the information
you need to get you started. If you need more detailed
instructions, please refer to the full user guide available
in the giftbox.
Alternatively, contact Customer Services on:
0800 0820750.
Opening hours: Mon-Fri: 9:00am - 5:30pm
/Sat: 9:00am - 2:00pm.
IT6TX base
IT6TX handset
Mains power adaptor for
the base
Guides
Telephone line cord
A
If you have purchased an IT.6TX with
extra colour covers or have purchased
the covers separately you will need to
remove the original cover to then replace
with the new cover.
• To remove the cover push down
and slide the cover o.
• To replace the cover, line up the
hooks on the cover with the slots
in the back of the handset and
slide up until it is in place.
Step 5. Set the date and time:
If you have subscribed to a Caller ID
Service and Auto Clock is set to on
the
date and time is set automatically
for all handsets when you receive
your rst call.
If you do not have a Caller ID
service, you can set the date and
time manually.
• Press
M, scroll d to
Clock/Alarm
and press M.
•
Date & Time
is displayed. Press M.
• Enter the date using the format
DD-MM-YY e.g. 04/08/15 for 4
August 2015 and press
M.
• Enter the time using the 24 hour
format
HH:MM
, e.g. 14:45 for
02.45pm and press M.
• Press
e to return to standby.
Earpiece
Navigating the menus
The basic steps of navigating through the menu and on-screen options.
• From the standby screen, press
M.
The main menu is opened.
• Use the
(u) or (d) keys to scroll through the menu.
• Soft key options
OK
and are displayed.
Press M to select
OK
and open a sub-menu or validate an option.
Press b to go back to previous menu level, correct a character or
cancel an action.
• Press
e to return to standby.
NOTE
If you do not press any button on the handset for 30 seconds the display
will automatically return to standby. It will also return to standby when the
handset is placed on the base or charger.
Push down
Remove
1
2
Slide
Replace
Line up hooks
on the back
cover with the
slots on the
handset
1
Slide
2
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

motorola-it.6.1tx

Suche zurücksetzen

  • An meinem MOTOROLA Festnetztelefon Modell IT.6.2Tx möchte ich den Akku wechseln .
    Abdeckung der Rückseite : Kein Problem - die 7 Schräubchen darunter sind entfernt -
    aber wie " ziehe " ich den Stecker mit den 3 Kabeln ? Eingereicht am 1-3-2023 17:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Motorola IT.6.1TX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Motorola IT.6.1TX

Motorola IT.6.1TX Bedienungsanleitung - Deutsch - 56 seiten

Motorola IT.6.1TX Bedienungsanleitung - Englisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info