655729
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Your IT6TX answer machine records unanswered calls when it is activated.
It can store up to 59 messages within the maximum recording time of
30 minutes. Each message can be up to 3 minutes long. Your personal
outgoing messages can be up to 3 minutes long.
You can operate your answering machine from:
the base.
the handset.
remotely, from another phone
Overview of answering machine
Base control keys
A Press to turn the answer machine on/o
P S Play new messages
Press again to stop playback
> Skip to the next message during message playback
< Replay current message
Press twice to skip back to previous message
X Delete current message during message playback
Long press to delete all messages when TAM is in standby mode
+ Increase speaker volume during message playback
- Decrease speaker volume during message playback
Warranty Information
Please refer to the main user guide.
Help
Using the phone
Answering machine key
illumination
Answering machine on / o -
illuminates at all times.
Play - illuminates when the
answering machine is on / flashes
when there are new messages.
Outgoing messages
This is the message your callers
hear on the answer machine. There
are two pre-recorded outgoing
messages, or you can record your
own.
Record also
The caller can leave a message.
The pre-recorded message is
“Hello, your call cannot be taken at
the moment, so please leave your
message after the tone.
Answer only
The caller can listen to your
announcement but cannot leave
a message. The pre-recorded
message is “Hello, your call cannot
be taken at the moment, and you
cannot leave a message, so please
call later.
Play messages
Press M, scroll u or d to
Answ
Machine
and press M.
Play
is
displayed.
Press
M to play new messages.
The display shows the number of
new messages and the date and
time the messages were left. If
there are no new messages, all
stored messages are played.
Press
b to display the callers
identication.
During playback press
M to
display a list of options.
Use the u and d keys to
change the options:
Repeat
- press M to repeat
current message
Next
- press M to play next
message
Previous
- press M to play
previous message
Delete
- press M to delete the
current message.
Calling
Make a call
Press
t.
Dial the telephone number.
Pre-dial
Enter the phone number
(maximum 24 digits). If you make
a mistake press
b.
Press
t to dial the phone
number entered.
Call from the phonebook
Press d. The rst entry in the
phonebook is displayed.
Scroll
u or d to the entry you
want.
Press
t to dial the number.
Call from the Calls list
Press u to enter the Call log
option menu, then press M to
enter
Call List
. The most recent
call is displayed.
Scroll
u or d to the entry you
want.
Press
t to dial.
Redial the last number
Press r. The last number dialled
is displayed.
If the number has more than 12
digits, the display shows
P and
the cursor blinks. Press
b to
display the rest. If the number
is stored in the Phonebook, the
name is displayed.
Press
t to dial.
Call a number in the redial list
Press r. The last number dialled
is displayed.
If required, scroll u or d to
display the number you want.
Press
t to dial the number.
Call direct memory numbers
1 to 9
Press and hold a key from 1 to
9 until the number is displayed
and dialled.
Answer a call
When the phone rings and
flashes in the display, press t
to answer the call.
If the handset is on the base amd
Auto Pick up mode is on, simply
lift up the handset from its base
to answer the call.
Press
t again to answer the
call via hands-free.
To switch between hands-free
and the earpiece press
t
.
Adjust volume
During a call, press u or d to
adjust the earpiece or hands-free
volume. The level is shown in the
handset display.
Mute
Mute the microphone so that you
can talk to someone else in the
room without your caller hearing
you.
During a call, press
b. The
microphone is muted.
Press
b again to turn the
microphone back on.
End a call
Press e.
After you hang up, the duration the
phone is o-hook is displayed for 5
seconds.
Phonebook
The IT6TX handset phonebook
can store up to 100 names and
numbers.
Numbers can be up to 24 digits
long and names up to 12 characters
long. Entries are stored in
alphabetical order.
Store an entry in the
phonebook
Press M.
Phonebook
is displayed.
Press
M. Scroll d to
New Entry
.
Press
M.
Enter Name
is displayed.
Enter a name and press
M.
Enter a number. Press
M to
save.
Press
e to return to standby.
Store a direct memory
number
Press M twice.
Scroll
d to
Direct Mem
and press
M.
Key 1
is displayed. Press M.
If no number is stored
No Entry
is
displayed. If a number is stored
the name will be displayed.
Scroll
d to
Key X
, where
X
is the
keypad number where the entry
will be stored. Press
M.
ADD
is displayed. Press M.
The rst phonebook entry
is displayed. Enter the rst
letter of the name to search
alphabetically then scroll
u or
d to the exact entry, then press
M .
Press
e to return to standby.
Save a number from the Calls
list to the phonebook
Press u and then press M. The
most recent call is displayed.
Scroll
u or d to the number
you want.
Press
M then press d until
Save
Number
is displayed.
Press
M.
Enter Name
is displayed.
Use the keypad to enter the
name.
Press
M then the number is
displayed, the user can then edit
the number if required and must
press M to save the number
(even if has not been edited).
Press
e to return to standby.
Copy a redial number to the
phonebook
Press r and scroll u or d to the
entry you want and press
M.
Display shows
Save Number
. Press
M.
Enter the name and press
M.
Edit the number if required and
press
M.
Press
e to return to standby.
Display language
You can change the display
language.
Press
M, scroll d to
Personal Set
and press M.
Scroll
d to
Language
. Press M.
Scroll
u or d to select the
language you want.
Press
M to conrm.
Press
e to return to standby.
Keypad lock
Prevent accidental dialling while
carrying the handset by locking the
keypad.
While the keypad is locked, you
can answer incoming calls as
normal.
Press and hold l.
The display shows
Keys Locked
.
To unlock the handset, press and
hold l again.
The icon is not scrolling during charge
Bad battery contact – move the handset slightly.
Dirty contact – Clean the battery contact with a cloth moistened with
alcohol.
Battery is full – no need to charge.
No dialling tone
No power – check the connections. Reset the phone: unplug and plug
back in the mains.
Batteries are empty – charge the batteries for at least 24 hours.
You are too far from the base – move closer to the base.
Wrong line cable – use the line cable provided.
Line adaptor (when needed) is not connected to the line cord – connect
the line adaptor (when needed) to the line cord.
Poor audio quality
The base is too close to electrical appliances, reinforced concrete walls
or metal doorframes – move the base at least one metre away from any
electrical appliances.
The icon is blinking or has disappeared
Handset is not registered to the base – register the handset to the base.
You are too far from the base – move closer to the base.
No ring tone
The ring tone is deactivated.
Increase the volume.
Caller ID service does not work
Check your subscription with your network operator.
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free memory.
No display
Try recharging or replacing the batteries.
Try disconnecting and connecting the base power supply.
If LED is not lit up, then try disconnecting and connecting the base
power supply.
Unable to register another handset
Maximum number of 5 handsets has been reached.
The display shows
Searching
. You must unregister a handset in order to
register a new one.
Answer machine does not record messages
Switch the answer machine on.
The memory may be full. If so, you will need to delete some messages.
Answer mode may be set to
Answer only
.
Change the mode to
Record also
.
Cannot access messages remotely
Remote access may be switched o.
If wrong PIN is entered a beep is played. You can enter the PIN once
again.
Cannot record outgoing message
The memory may be full. If so, you will need to delete some messages.
Answer machine stops automatically
The memory may be full. If so, you will need to delete some messages.
The maximum message length is 3 minutes.
Manufactured, distributed or sold by Suncorp
Technologies Ltd., oicial licensee for this
product. MOTOROLA and the Stylized M Logo
are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC. and are
used under license. All other trademarks are the
property of their respective owners.
© 2015 Motorola Mobility LLC. All rights reserved.
Version 2 (UK)
Answering machine
Delete
Answering machine
On / O
Skip back
Volume Up
Volume Down
Play / Stop
Skip forward
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Motorola IT.6.3TX wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Motorola IT.6.3TX

Motorola IT.6.3TX Bedienungsanleitung - Deutsch - 56 seiten

Motorola IT.6.3TX Bedienungsanleitung - Englisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info