User's Guide
Digital 1.8 GHz
DIGIT
ME7050 Series
MOTOROLA and the Styliz
T
their respective owners, © Motorola, Inc., 2007
Congratulations on your pur
Y
Welcome
Welcome
Important Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk
of fire, electric shock and injury to persons or property:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Keep all slit the phone unblocked. Do not set the phone on a
heating register or over a radiator
the installation site.
Do not use while wet or while standing in water
Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
Do not allow anything to rest on the power cord. Place the power cord so that it
will not be walked on.
Never insert objects of any kind into the product slits as that may result in fire or
shock.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Do not disassemble this product. If service or repair work is required, contact the
Warranty Service phone number found in the back of this user's guide.
Do not overload wall outlets and extension cords.
Avoid using during an electrical storm. Use a surge protector to protect the
equipment.
Do not use this cordless phone to report a gas leak, especially if you are in the
vicinity of the gas line.
Reduce risk of fire and shock by:
Unplug this cordless phone immediately from an outlet if:
The power cord or plug is damaged or fra
Liquid has been spilled into the product.
The product has been exposed to rain or waterase
until after you have unplugged the power and phone from the wall. Then retrieve
the unit by unplug
The product has been dropped or the cabinet has been dam
The product exhibits a distinc
Important Safety Instructions
For product-related questions, please refer to the W arranty section.
Please retain your original dated sales receipt for your records. For war
of your Motorola Product, you will need to provide a copy of your dated sales receipt
to condfilm warranty status.
Complies with the essential protective requirements and objectives of the EC's R&TTE
Directive 1999/5/EC; EC Low V
Copyright © 2007 Motorola, Inc.
All rights reserved. No part of this publication may be reproduced in any form or by
any means or used to make any derivative work (suc
or adapt written permission from Motorola, Inc.
Motorola reserves the right to revise this publication and to make changes in content
from time to time without obligation on the part of Motorola to provide notification
of suc without warranty of any kind,
either implied or expressed, to, the implied w
merchantability and fitnessfor a particular purpose. Motorola may make improvements
or changes in the product(s) described in this manual at any time.
MOTOROLA, the Stylized M Logo, and PhoneWrap are registered in the U.S. Patent
and T All other product or service names are the property of their
respective owners.
Read and understand all instructions and save them f
Follow all warnings and instructions marked on the product.
Do not install this product near a bath tub, sink or shower
Operate this phone using only the power source that is indicated on the marking
label. If you are unsure of the power supply to your home, consult with your dealer
or local power company
Do not place this product on an unstable cart, stand or table. This product may
fall, causing serious damage to the product.
Adjust only those controls that are covered by the operating instructions. Improper
adjustment of other controls ma damage and will often require extensive
work to restore the product to normal operation.
Clean this product with a sof cleaning agents
to clean this phone.
Installation Guidelines
1.
2.
3.
4.
5.
6.
7.
Use only the power supply that came with this unit. Using other power supplies
may damage the unit.
Because cordless phones operate on electricity should have at least one phone
in your home that isn't cordless, in case the power in your home goes out.
T avoid interference to nearby appliances, do not place the base of the cordles s
phone on or near a
It is impossible to make emergency calls when the keypad lock is enabled.
8.
9.
10.
11.
These Operating Instructions are issued for information purposes.
content is not the subject of a contract.
All indicated data are merely nominal values.
country.
T Amendments
This device is dedicated to be used in the analog public switched telecomunication
network (PSTN).
Open the battery compartment, by pushing downwards on the cover.
Insert the 2 x AAA (60
observing the correct polarity.
CAUTION : Please do not use alkaline or
Non-rechargeable batteries. It may cause
Permanent damage to the unit and void
The warranty.
Non rechargeable batteries can explode and cause
injuries and heavy damage on your environment.
The base station does not
have a power switch. Make
sure that there is a mains
socket nearby and that the
mains adaptor is easily
accessible. Check that the
voltage indicated on the
mains adaptor corresponds
to that of your mains current.
Insert the plug in the corresponding socket of the base station (it is not possible to
mix them up as the socket and plug are designed to be reverse-polarity protected).
Route the cable beneath the telephone towards the back. Insert the plug into the
socket of the telephone plug of your telephone connection. Insert the mains adaptor
in the wall socket. The base station is now ready for use.
Connecting the Base Station and Mains Adaptor
+
+
_
_
Pac
Base Station
Mobile Handset
Mains Adaptor
T
Rechargeable Bat
type micro AAA
Charger Unit
User's Guide
Single Pac
1
1
1
1
2
0
1
T
1
2
2
1
4
1
1
T
1
3
3
1
6
2
1
Quad Pac
1
4
4
1
8
3
1
Do not expose the base station and charger unit to direct sunlight. Do
not allow the base station and charger unit to become wet. They should
not be set up in rooms which are subject to condensation or corrosive
steam or a high concentration of dust (e.g. cellars, garages or
conservatories). The room temperature must be between 0
0
Ca
0
C.
Installation
DIGIT
WITH DIGIT
DIGIT
WITH SPEAKERPHONE
ME7052 Series
ME7060 Series
On Handset and Base
Adjust the
handset volume
Control Buttons
Handsfree Speakerphone
On Answering Machine (For model ME7060)
Display icons
Next key-During message playback,
press to skip forward to the next
message.
Play
Stop-Stops message playback.Ends
recording.
Replay/previous key
During message playback,press to
replay the current message or press
twice to play the previous message.
Charging indicator
Illuminates when the handset is
charging in the base station.
Call indicator
Flashes when you have incoming
calls.
Volume down(-)-Press to
decrease loudspeaker volume.
Menu key-press to open the
answering machine menu.
Volume up(+)-Increase
loudspeaker volume.
Page(Find Handset)key-Press to
locate a missing handset/page all
handsets registered to the base.
Record/Memo key
Use to record your outgoing
message or memo.
Mailbox indicators
Flash when new messages are
stored. The display shows the
number of messages.
Delete key-Use to delete
messages /memos.
Rec./
Memo
Featu
* user must subscribe to the network's caller id service.
+ more then one handset required.
+
(for Model ME7060)
Congratulations on your purchase of this high quality, cordless telephone set.
The set offers the following features:
Caller ID on Call Waiting
(dependent on network)
*
*
+
Programmable call bloc
Operation with 2 standard AAA
re-chargeable batteries
Standards
Backlight display
Digital Answering Mac
minutes recording time , 59 messages
capacity
Handsfree (for Model ME7052 )
Features
Please chec. If s om ething is mis s ing or has
become damaged in transit, you should NOT use the telephone. In suc
should return to the dealer with your sales receipt or contact the Motorola's distributor
directly. (For details, please refer to the
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location. Make sure
the location, also make sure that all cables can be routed so as to prevent people
tripping over them. Furthermore, avoid placing the base station and c
the immediate vicinity of other electronic appliances such as microw
Fi's, for example.
Note: Retain the pac damaged should
you ever need to return it.
1 2
4
5
6
3
7 8 9 10
11 12 13 14
Note:
Navigate in the menu structure as follows:
Press the Menu key
.
Then use the arrow keys to navigate through the menu or select the required menu
item directly using the digit keys.
Example: Enter MENU > 3 > to access '1-RINGER' > '2-HS NAME', then enter the HS
Name.
1-VOL UME
2-EXT RINGER
3-INT RINGER
ON / OFF
ON / OFF
ON / OFF
CONFIRM?
SEARCHING
3-HANDSET
1-RINGER
2-HS NAME
3-PREFIX MEM
4-KEY TONE
5-AUTO ANS
6-CALL TIMER
7-DEFAUL
8-REGISTER
[-----]
ME
ME
2-PHONE BOOK
1-NEW ENTR Y
2-LIST ENTR Y
3-EDIT ENTR Y
4-DELETE
5-DELETE ALL
ENTER NAME
ENTER NO
CONFIRM?
NORMAL RING
VIP RING 1-1
1-CALL L
5-LANGUAGE
Menu Structure
ENGLISH,DEUTSCH,ITALIANO
PORTUGUES,NEDERLANDS,POLSKI,SVENSKA,TURKCE
1.
2.
3.
Press the key.
Press the number of the required handset (1
Press the key to end the call.
If more than one handset is registered on the base station,
internal calls can be made free of charge.
Making Inter
Press the key repeatedly until menu item LANGUAGE appears.
Press the
Press or as often as necessary to select the required language.
Press the
T
Proceed as follows to select a language:
Selecting the Language
1.
2.
3.
4.
Switching the Handset On/Of
When the handset is placed on the base station or charging unit, it switc
automatically and starts to charge up. Allow the batteries to be charged for 14 hours
On/Off switch.
Backlight
backlight
Note: If an external call is recei
call, short acoustic signals are issued (call waiting).
Making Exter
There are two ways to dial a number, namely direct dialing or on-hook dialing.
Press the key and wait for the dialing tone.
Dial the telephone number and complete the call.
Press the key to end the call.
Dire
On-hook dialing
Dial the telephone number.
Delete any incorrect entries by pressing the key
Press the key.The number entered is dialed and a
connection established. Carry out the conversation.
Press the key to end the call.
1.
2.
3.
1.
2.
3.
4.
When an external call is received, all the handsets registered and the base station
ring.
T
1. Take the handset from the base station; a connection is automatically established
(when the AUTO ANS function is active). Otherwise, press the key.
2.
3.
Carry out the conversation.
Press the key to end the call.
Using the Telephone
1.
2.
Press the 0 key for two seconds.
Supplement the call number and press the key to establish a connection.
Note: The prefix number (e.g. an access code) must have been programmed beforehand.
Refer to "Handset Settings".
Press the key. Carry out the conversation.
Press the key to end the call.
1.
2.
.
Prefix Dialing
Press the key; the first entry in the phone book appears.
Press the or key to select the required subscriber from the phone book.
Alternatively, enter the first letter of the name required.
Press the key. The number is dialed. Carry out the conversation.
1.
2.
3.
Dialing from the Phone Book
If calls have been received in your absence, these are collected in the CALL LOG
memory when your telephone service has enabled this function.
Press the key as often as necessary until the CALL LOG menu appears.
Press the key. Alternatively
Press the or keys to browse through the CALL LOG memory.
1.
2.
3.
Call Log Operations
Press the key to return the call.
Or
4.
Press and hold the key two seconds to delete one or all the entries. Selection
is made using the or key. Press the key.
Or
Press the key to enter the subscribers in the phone book.
Enter the name.
Press the key.
Press the or key to select the normal ring or VIP ring.
Press the key.
5.
6.
7.
8.
9.
10.
Note: 1. The CALL LOG symbol and display indicator only disappear after browsing
through all the entries. 2. It is only possible to enter subscribers in the phone book
who are not already entered.
Press the key to switch the microphone on
or off during a call.
Muting the Microphone
1.
VOL+
VOL
Note: If several handsets are registered on the base station and a call should b
hold or transferred, press the key instead of .
Access a Call
When on an external call, press key to access a CallWaiting Line when you hear
the call waiting prompt signal. P
When on an external call (P
1
2. Dial the number of the extension.
3. Press key again if you would like to ta
the call.
1.
2.
3.
4.
Press the key and enter the number of the
corresponding handset (e.g. 2) which should be included in the call.
The external caller is kept on hold. As soon as handset 2 takes the call, press
key to transfer the call to handset 2.
Or
The external caller is kept on hold. as soon as handset 2 takes the call, press and
hold key to activate the teleconference.
By pressing the key, any of the handsets can be disconnected from the
teleconference and the other handset continues with the external call.
After having received an external call, it is possible to include
a second handset in the conversation (three-way conference).
T
Entering a Dialing Pause (P)
If the MOTOROLA telephone is connected to a PBX system, it may be
necessary to insert a dialing pause. T
relevant digit, e.g. 0, for an outside line (0P
a pause. The pause can also be entered when programming numbers in the phone
book.
Press the key as often as necessary until the PHONE BOOK menu appears.
Press the or key to select DELETE / DELETE ALL.
Press the or key to select the phone book entry. Alternatively
first letter of the name required.
Press the key to confirm the input.
1.
2.
3.
4.
Delete Entries
Note: The delete process can be stopped at any time prior to confirmation of it by
pressing the key several times. if all the entries should be deleted, select DELETE
ALL instead of DELETE at Pt. 2.
Phone Book
Receiver impedance
Microphone impedance
Receiver output power
Microphone sensitivity
Technical D
32
1. 4
60mW
-54dB
(For Model ME7052)
ME7050
ME7060
ME7052
4-BASE
1-BARRING
2-EMERGENCY
3-RINGER
4-FLASH TIME
5-DIAL MODE
6-CHANGE PIN
7-DEFAUL
8-DEREGISTER
ENTER PIN
ENTER PIN
[-----]
100/250/600
TONE
PULSE
ENTER PIN
ENTER PIN
ENTER PIN
HANDSET 1-4
1-
2-
MELOD
ME˄
for Model ME7050 & ME7052˅
NEW PIN
CONFIRM?
HANDSET 1-4
DISABLE
EXTERNAL
NUMBER
REPEAT
CONFIRM?
ENTER NO
Note: For fully discharged bat
precharge.
Indicates the battey charge status/level.
No bars when battery is empty.
Indicates that the outside line is engaged.
Indicates an incoming, external call.
Indicates an incoming, internal call.
Indicates if you have unanswered calls.
(Details available in the caller list).
Indicates that the keypad lock is on.
Microphone is muted.
Ringer is switched off.
Indicates the handset is registered on the
base.
Flashes if there is no radio.
Scroll(UP) or (DOWN) to see further details
of the entry.
7050/7052/7060 - EEU-Eng manual (P.1)
380 x 520mm
