779576
31
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
31
3. If the passcode is entered correctly, the Answering System will play the following voice
prompts:
Press (2) to play messages, press (2) again to stop
Press (0) while playing a message to erase
Press (1) to review the previous message
Press (3) to play the next message
Press (4) to turn On and O the Answering System
Press (7) to review menu again
4. Enter the remote commands.
5. To exit remote operation, hang up. The system will automatically disconnect the call if the user
does not enter a command within 10 seconds.
NOTE
The default remote password is 000.
Only the message being played can be erased in remote access mode.
13.8 Memory Full
When the Answering System memory is full, the system will answer after 10 rings. Memory full will
be announced and waits for you to enter 3-digit remote password. If you don’t enter the remote
password within 7 seconds, the phone hangs up.
You should erase some messages so the Answering System may record new messages.
NOTE
The unit will also answer after the 10th ring if Answering System set to O. To access the Answering
System, enter your 3-digit remote password.
14 Display Messages
The following messages show the status of the phone, provide Caller ID information, or help you
set up and use your phone.
DELETE ALL?
Prompt asking if you want to erase all records.
DELETE?
Prompt asking if you want to erase the current record.
ENTER NAME:
Prompt telling you to enter a name.
ENTER NUMBER:
Prompt telling you to enter a telephone number.
NEW CALLS
Indicates call or calls which have not been reviewed.
UNAVAILABLE
Indicates that the function you want to initialize cannot work at that
moment or the function being worked cannot continue. The system
is busy or some other higher priority function is being performed.
For example, the message playback function will be stopped when
there is an incoming call.
NO LINE
Indicates that the telephone line is not connected.
EMPTY
Indicates there are no CID records in memory.
BLOCKED
Indicates the person is calling from a number which is blocked from
transmission.
UNKNOWN
Indicates incoming call is from an area not serviced by CID or the CID
information was not sent.
INCOMPLETE DATA
Indicates incorrect CID information received.
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Motorola ML25254 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info