Owner Unit Menu Options 13
ENGLISH
4.5 Alarm
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted.
3. Press the + UP button or - DOWN button to select the alarm time
(
6h
,
4h
,
2h
). (The default setting is Alarm OFF.)
If an alarm time is selected, the owner unit will beep for about 45
seconds after every 6, 4 or 2 hour period, and the alarm icon will
flash red.
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted,
and the / / /
menu will pop up.
3. Press the
+ UP button or - DOWN button to select , and press
the OK button to confirm.
4. 1 / 2 / 3 / 4 will pop up, press the
+ UP button or -
DOWN button to select the desired CAM, and press the OK button to
start searching for a pet unit. The green audio level LED will flash
rapidly while searching.
5. Press and hold the PAIR button underneath the pet unit until the
owner unit finds the camera, beeps and the picture from the camera
appears.
NOTE
A camera can only be registered to one owner unit at any one time.
4.6.2 View a camera
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until is highlighted
and the / / /
menu pops up.
3. Press the
+ UP button or - DOWN button to select , and press
the OK button to confirm.
4. 1 / 2 / 3 / 4 will pop up, press the
+ UP button or -
DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
