34
GB
Cleaning the oven
The following parts of your microwave must be cleaned regularly to
avoid any accumulation of food particles and grease :
• The inner and outer surfaces of your appliance,
• The door and its seals,
• The drive, the ring bearing and the turntable.
Failure to maintain the oven in a clean condition could lead to dete-
rioration of the surface that could adversly affect the life of the
appliance and possibly result in a hasardous situation.
Make sure that the door closes correctly.
Clean the outer surfaces with a soft cloth and soapy water. Rinse and dry carefully.
Remove any particles or stains inside your appliance or on the ring bearing
with a soapy cloth. Rinse and dry carefully. The grill element hinges down
to make it easier to clean the roof of the oven.
To help dislodge food particles and eliminate bad smells, put a glass of
lemon juice diluted in water on the turntable and run your appliance for 2
minutes at maximum power. The steam will soften the dirty marks. Rince
and dry
Take care not to allow water to run into the ventilation holes.
Never use abrasive or solvent cleaners.
Clean the door seals carefully, making sure that :
• There is no accumulation of particles,
• Nothing prevents the door from closing properly.
• Clean the inside of your appliance after every use with a suitable detergent.
Always allow your oven to cool down before cleaning it.
Cleaning the accessories
- glass turntable
- DUO rack
can be cleaned in the dishwasher.
- crousty dish
- feeding bottle
cannot be put through the dishwasher.
Wash it with soapy water. Rinse and dry them carefully.
Your appliance must not be used if the door or door seals are damaged,
for example :
- broken hinges
- damaged seals
- internal deformation
Technical problems
Cleaning
Please contact the after-sales service for any repairs (cf : attached list).
It always takes time to become familiar with a new appliance. If you have
one of the problems listed below, try the solutions suggested.
• The following occurrences are perfectly normal and should give no
cause for alarm :
- condensation inside the oven,
- the escape of air around the door and the outer walls,
- light reflections around the door and on the outer walls,
- steam escaping from the door or the ventilation holes.
• If you find that the food is not cooked at all :
- make sure that you have programmed the timer correctly and have pres-
sed the “Start + 30 s” button,
- make sure that the door closes correctly,
- make sure that the circuit breaker is not tripped or the fuse blown.
• The food is overcooked or undercooked :
- make sure that the programmed cooking time is correct for the food you
are cooking,
- make sure that you have chosen the right power level,
- make sure that you have not forgotten to remove the aluminium foil
covering the food tray,
- make sure that you are not using an “absorbent” container,
- make sure that the rear ventilation holes of the appliance are not obs-
tructed.
• Cracks can be heard or sparks can be seen inside the oven :
- make sure that you have not used containers with metallic decoration,
- make sure that you have not left a metal utensil (fork etc.) inside the
oven,
- make sure that you have not positioned aluminium foil too close to the
oven walls, positioned a metal tray badly or too close to another metal
tray or forgotten to remove the metal fastener from a freezer bag.
• A beep sounds if you press any button on the control panel :
- make sure that the Child Safety feature is not activated, if it is, deactiva-
te it.
• The interior lighting does not work, although your oven works nor-
mally :
- the bulb is probably blown, your appliance nevertheless remains usable.
• In the event of overheating or prolonged use with a small quantity of
food:
- the thermal safety device fitted in your appliance may operate, turning
it off. Wait for 15 minutes for the safety device to deactivate. If your
appliance still does not work after this 15-minute period, unplug it and do
not use it.