Bedienungsanleitung Moulinex DD9091 OPTIPRO (Seite 15 von 44) (Englisch, Französisch, Italienisch, Türkisch)

535265

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

double-sidedmetaltray(E9bis).BladesA

and B, in this case, are obtained by

turning the tray over (blade G cannot be

mountedinthis case).

Slide the blades (A, G, H)into the blade

holder disc (E9), place the blade holder

(E8) on the axis of the bowl (E), then

place the blade holder disc (E9) on the

blade holder (E8). Put the reducer (E6)

onthelid (E3).

Placethelid(E3)on thebowl andlockit.

Set the motor unit (A1) in position on

thelid.Turnon.

Introduce the food through the feeder

tube and push them down using the

pusher(E2),neverwithyourfingersor

anyotherutensil.

To dismantle, press theejectbutton(E7)

to remove the motor unit (A1) from the

reducer(E6)before removingthelid.

Unlock(E7)thelid(E3)toaccessthefood.

Carefully remove the blade holder disc

(E9) and the blade holder (E8) before

removingthefood.Thencarefullyremove

theblades(A,G,H)fromthebladeholder

disc(E9).

BladeA(Grater):carrots,cheese,celery,

etc.

Prepareamaximumof1000goffoodata

time(butnotmeatorcoldmeatproducts).

Blade H (Slice): raw sliced potatoes for

gratins, carrots, cucumbers, etc.

maximum800g.

Blade G (Parmesan): Parmesan, raw

potatoes.

Unplug the appliance, remove the

accessories.

The reducers (E6, F3 and the whisk

holderC1)aswell asthemotor unit(A1)

are not dishwasher proof; you can wipe

themwithadamp sponge.

Alltheother accessoriesaredishwasher

proof. Place the blender shaft (B1)

with the blade facing upwards in the

Cleaning

dishwasher. Do not use abrasive

sponges or objects that contain metal

parts.

Never plunge the motor unit (A1) into

water. Wipe it down with a dry or very

slightlydampcloth.

In the event that your accessories

become colour stained by foods such as

carrots, oranges, beetroot etc rub over

them immediately after use with a cloth

dipped in a little sunflower oil and then

cleanthemas usual.

HandlethebladesE4, E5,F2andI2

orbladesA,G,H with extremecare;

theyarevery sharp.

Start by checking the power cord and

plug,then:

Check that the lid (E3) to your

multifunction bowlisproperlylocked.If it

is not properly locked your motor unit

(A1) will not be able to make your

multifunction bowl work because the

reducer drive system (E6) will not

operate.

Check whether the appliance’s safety

system has not been activated, by

processingtoomuch mixtureorby using

theappliancefortoo long.Ifit has, leave

the appliance to cool down for around

30minutes.

Iftheliddoesnotlockproperly,pressthe

unlockingbutton(E7)onthereducer(E6)

beforelockingit again.

Refer to the “Usage” paragraph for

assemblyinstructions.

You have carefully followed all these

instructions, and yet your appliance still

doesnotwork?

PleasecontactourHelpline:

08456021454- UK

(01)4018448 -Ireland

orconsultourwebsite :

www.moulinex.co.uk

What do I do if my appliance

doesn’t work?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Moulinex DD9091 OPTIPRO Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info